Up to two independent PC Card / CardBus sockets
Two slots Type I (3.3 mm) and II (5.0 mm), or
One slot Type III (10.5 mm)
32-bit/33-MHz PCI interface, master/slave support
Hot insertion and removal
Two activity LEDs with 2-slot, Type-I/II model
PC Card power interface
•
+5 V/+3.3 V: 1 A peak (each slot)
•
+12 V: 150 mA peak (each slot)
Note: 16-bit legacy PCMCIA cards may cause interrupt problems!
Front Connections
Two PC Card / CardBus slots Type I or II, or
One PC Card / CardBus slot Type III
CompactPCI® Bus
Compliance with CompactPCI® Core Specification PICMG 2.0 R3.0
Peripheral slot
32-bit/33-MHz PCI-to-PCI bridge
V(I/O): +3.3 V (+5 V tolerant)
Electrical Specifications
Supply voltage/power consumption:
•
+5 V (-3%/+5%), depending on plugged PC Card, 50 mA max. w/o card
•
+3.3 V (-3%/+5%), depending on plugged PC Card, 50 mA max. w/o card
•
±12 V (-5%/+5%), may be used by some PC Cards
Mechanical Specifications
Dimensions: conforming to CompactPCI® specification for 3U boards
Front panel: 4HP with ejector
Weight: 150 g (w/o PC Card)
Environmental Specifications
Temperature range (operation):
•
-40..+85°C (screened, also depending on plugged PC Card)
•
Airflow: min. 10 m³/h
Temperature range (storage): -40..+85°C
Relative humidity (operation): max. 95% non-condensing
Relative humidity (storage): max. 95% non-condensing
Altitude: -300 m to +3,000 m
Shock: 15 g/11 ms
Bump: 10 g/16 ms
Vibration (sinusoidal): 2 g/10..150 Hz
Conformal coating on request
MTBF
MTBF: 2,176,890 h @ 40°C according to IEC/TR 62380 (RDF 2000)
Safety
PCB manufactured with a flammability rating of 94V-0 by UL recognized manufacturers
EMC
Tested according to EN 55022 (radio disturbance), IEC1000-4-2 (ESD) and IEC1000-4-4 (burst)
Software Support
PCI1520 PC Card controller device drivers integrated under Windows® and Linux
PC Card drivers as supported
