Simple Switch replacement: configuration can be done via external dongle without any tools
High-speed non-blocking, store-and-forward switching
Up to eight 10/100Base-T ports at front panel (Electrical isolation: 1500 Vrms)
One 10/100Base-T port at rear connector
Port configuration: copper, 10/100 Mbit/s
Auto-negotiation / Auto MDI/MDIX crossover on all ports / manual configuration possible
Layer2-based Policy Control List
8K MAC address lookup table with automatic learning and aging
Up to 4096 VLANs
Rapid Spanning Tree Protocol and Multiple Spanning Tree Protocol to ensure loop free topology formation
Reducing multicast traffic in the network through multicast snooping - IGS (IPv4) and MLDS (IPv6)
Management Firmware System Features
Saving and restoring user configurations
Software upgrades through TFTP
System logs (syslog) and e-mail alerts for critical events
Remote monitoring (RMON) and alarm generation
Displaying the running configuration in the form of CLI commands
Management interfaces through
•
CLI (RS232 console, Telnet, SSH)
•
SNMP v3
Switch configuration can be loaded from external dongle
Management Firmware Security Features
User authentication using IEEE 802.1x
Controlling management access through SNMP and CLI only from authorized managers
MAC based access list (ACL) for traffic filtering
Rate-limiting and storm control to prevent packet flooding from malicious peers
Supported Protocols and Standards
DHCP client / server / relay (IEEE 1394)
GVRP/GMRP support (IEEE 802.1D, 2004)
Hypertext Transport Protocol (HTTP) Server for Remote Management and Monitoring (RFC2626)
HTTP Secure (HTTPS) - HTTP-based Remote Management over encrypted data channel (RFC2818)
IGMP snooping / IGMP proxy / IGMP Querier / MLD Discovery (RFC 4541)
Link aggregation LACP / EtherChannel (IEEE 802.3ad, 2005)
Link Layer Discovery Protocol LLDP (IEEE 802.1ab, 2005)
Multiple Spanning Tree (MSTP) (IEEE 802.1s)
Priority-based switching, Quality of Service/DiffServ, tagged frames, Layer2-based 801.1Q VLAN-ID packet routing (IEEE 802.1p)
Port-based authentication with EAP (IEEE 802.1x - REV2004/RFC3748)
Rapid Spanning Tree Protocol (RSTP IEEE 802.1w)
Secure Shell (SSH) for Remote Configuration (CLI) over secure channel
SNMP v1, v2c, v3 management
Syslog (RFC 5424)
TCP/IP v4 and v6
TFTP (RFC 1350)
VLAN/port-based VLANs GVRP/MVRP (IEEE 802.1Q Rev D5.0, 2005)
Service Interface
9-pin D-Sub connector at front
RS232 / V24
I2C interface for external dongle
Front I/O
Eight Ethernet ports on RJ45 or M12 connectors
One service interface via 9-pin D-Sub connector
16 link and activity Ethernet status LEDs (2 per channel)
Status LEDs for power, reset and error codes
Rear I/O
One 10/100Base-T port via CompactPCI® J1 (rear)
CompactPCI® Bus
Compliance with CompactPCI® Specification 2.0 R3.0
Only one slot required on the 3U CompactPCI® bus
Peripheral slot
Compliance with PCI Specification 2.1
V(I/O): +3.3 V
Ninth Fast Ethernet port via CompactPCI® J1
Electrical Specifications
Supply voltage/power consumption:
•
+3.3 V (-3%/+5%), 5 W
•
+5 V (-3%/+5%), 5 W
Mechanical Specifications
Dimensions: conforming to CompactPCI® specification for 3U boards
Weight: 316 g (16HP model with M12 connectors)
Environmental Specifications
Temperature range (operation):
•
-40..+85°C (qualified components)
•
Airflow: min. 10 m³/h
Temperature range (storage): -40..+85°C
Relative humidity (operation): max. 95% non-condensing
Relative humidity (storage): max. 95% non-condensing
Altitude: -300 m to + 3000 m
Shock: according to EN 60068-2-27
Bump: according to EN 60068-2-29
Vibration (sinusoidal): according to EN 60068-2-6
Conformal coating on request (standard with M12 connectors)
MTBF
778 505 h (RJ45 model) or 752 506 h (M12 model) @ 40°C according to IEC/TR 62380 (RDF 2000)
Safety
Flammability
•
PCB manufactured with a flammability rating of 94V-0 by UL recognized manufacturers
EMC Conformity
EN 55022 (radio disturbance)
EN61000-4-2 (ESD Immunity)
IEC 61000-4-4 (burst)
Software Support
Firmware for configuration and management included
