F601 - 3U CompactPCI® Side Card for Multimedia

Audio
• One HD (high definition) audio codec at front panel
• Symmetric stereo output (two 350mW mono amplifiers)
• Symmetric mono output (integrated 2W Class D mono amplifier)

RS232..422 UART (COM1)
• One D-Sub connector at second front panel
• Via SA-Adapter™
• Data rates up to 115.2kbits/s
• Only full duplex operation for RS422
• Handshake lines: full support; lines depend on SA-Adapter™

Mass Storage

Serial ATA (SATA)
• One port for onboard 2.5" hard-disk drive
• Transfer rates up to 150MB/s (depends on hard disk)
• RAID level 0/1 support (depends on CPU board)

Miscellaneous

CompactPCI® J1 and J2 are assembled for increased mechanical stability and/or for power supply via J1

CompactPCI® J2 can optionally be used to realize several functions via rear I/O. See Options.

Electrical Specifications

Supply voltage/power consumption:
• +5V (-3%/+5%), 635mA typ. with hard disk, max. value depends on hard disk
• +3.3V (-3%/+5%), 500 mA typ.

MTBF: 1,069,323h @ 40°C (derived from MIL-HDBK-217F)

Mechanical Specifications

Dimensions: conforming to CompactPCI® specification for 3U boards

Weight: 330g (with hard disk and 12HP front panel)

Environmental Specifications

Temperature range (operation):
• 0..+60°C up to -40..+85°C (depending on hard disk; please refer to the hard disk specifications for possible limits)
• Industrial temperature range on request
• Airflow: min. 10m³/h

Temperature range (storage): -40..+85°C

Relative humidity (operation): max. 95% non-condensing

Relative humidity (storage): max. 95% non-condensing

Altitude: -300m to + 3,000m

Shock: 15g/11ms

Bump: 10g/16ms

Vibration (sinusoidal): 1g/10..150Hz

Conformal coating on request

Safety

PCB manufactured with a flammability rating of 94V-0 by UL recognized manufacturers

EMC

Tested according to EN 55022 (radio disturbance), IEC1000-4-2 (ESD) and IEC1000-4-4 (burst)

Software Support

Driver software can be found in the data sheet of the CPU board that you use.

Interfaces (Front)

2 DVI, 1 audio, 1 COM

2 DVI, 1 audio, 1 PS/2

PS/2 interface instead of COM (via SA-Adapter™ on second front panel)

SA-Adapters™ to be ordered separately

Interfaces (Rear I/O)

1 HD audio link (instead of audio at the front; without audio codec and amplifiers)

8 I/O lines controlled by SMBus from the CPU board

1 serial TTL interface (full handshake support, instead of UART at the front)

1 RS485 interface (differential half-duplex)

1 Gigabit Ethernet

Operation Temperature

0..+60°C

-40..+85°C

Please note that some of these options may only be available for large volumes. Please ask our sales staff for more information.