F602 - 3U CompactPCI® Express Side Card

CompactPCI® Express connector XP1 for power supply

CompactPCI® Express connectors XJ2 and XJ3 for 4 CompactPCI® Express links with 1 lane each
• CPU board F14 only supports 2 or 3 CompactPCI® Express links with 1 lane each

CompactPCI® Express connector XJ4 for control signals and ground

I/O

DVI
• One DVI-D connector at front panel
• SDVO PanelLink transmitter
• Maximum resolution: 1600 x 1200 pixels
• 60Hz refresh rate
• Dual monitor support

USB
• One USB 2.0 port
• Series A connector at front panel
• UHCI implementation
• Data rates up to 480Mbit/s
• High current up to 1A

UART
• One at front panel
• Physical interface using SA-Adapter™ via 10-pin connector
• RS232..RS422, isolated or not
• Only full duplex operation for RS422
• Data rates up to 1 Mbit/s
• FIFO receive and transmit buffers for high data throughput
• Handshake lines: full support; lines depend on SA-Adapters™

Mass Storage

Serial ATA (SATA)
• One port for onboard 2.5" hard-disk drive
• Transfer rates up to 150MB/s (depends on hard disk)
• RAID level 0/1 support (depends on CPU board)

Electrical Specifications

Supply voltage/power consumption:
• +5V (-3%/+5%), tbd typ. (w/o hard disk)
• +3.3V (-3%/+5%), tbd typ. (w/o hard disk)

MTBF: 1,861,103h @ 40°C according to IEC/TR 62380 (RDF 2000)

Mechanical Specifications

Dimensions: conforming to CompactPCI® specification for 3U boards

Mountable on right side of the CPU

Weight: 150g (w/o hard disk)

Environmental Specifications

Temperature range (operation):
• 0..+60°C up to -40..+85°C (depending on hard disk; please refer to the hard disk specifications for possible limits)
• Airflow: min. 10m³/h

Temperature range (storage): -40..+85°C

Relative humidity (operation): max. 95% non-condensing

Relative humidity (storage): max. 95% non-condensing

Altitude: -300m to + 3,000m

Shock: 15g/11ms

Bump: 10g/16ms

Vibration (sinusoidal): 2g/10..150Hz

Conformal coating on request

Safety

PCB manufactured with a flammability rating of 94V-0 by UL recognized manufacturers

EMC

Tested according to EN 55022 (radio disturbance), IEC1000-4-2 (ESD) and IEC1000-4-4 (burst)

Software Support

Driver software can be found in the data sheet of the CPU board that you use.

Operation Temperature

0..+60°C

-40..+85°C

Please note that some of these options may only be available for large volumes. Please ask our sales staff for more information.