4 CompactPCI® Serial (PICMG CPCI-S.0) peripheral slots to the right
3 CompactPCI® peripheral slots to the left
All slots prepared for rear I/O
250 W Plug-in PSU 90..264 VAC
44HP space for individual extensions
For MEN SBCs F11S, F12N, F14, F15, F17, F18, F19P, F21P, F22P, F50P, F75P
This compact 4U rack-mount enclosure is a basic system that allows the configuration with both CompactPCI® Serial and CompactPCI® cards. Being a hybrid system, it offers an uncomplicated and cost-effective migration solution from parallel 3U CompactPCI® to serial CompactPCI® Serial via the CompactPCI® PlusIO standard.
The 8-slot hybrid backplane in this configuration does not need a bridge or an active logic. The four slots on the left are designed for 32-bit CompactPCI® and rear I/O on P2. The four slots on the right are reserved for CompactPCI® Serial. The CompactPCI® PlusIO system slot is the fourth slot from the left. Either a standard CompactPCI® 2.0 or a PICMG 2.30 CompactPCI® PlusIO CPU board can be used in this slot.
This hybrid system is designed for use with the MEN system-slot SBCs F11S, F12N, F14, F15, F17, F18, F19P, F21P, F22P and F50P. Only F19P, F21P, F22P and F50P support CompactPCI® Serial.
That way, the three remaining slots on the CompactPCI® bus and the four CompactPCI® Serial slots can be used to install additonal I/O functions.
While the CompactPCI® Serial slots on the right are best suited for functions like Gigabit Ethernet, 10 Gigabit Ethernet or high end graphic with high data rate requirements, the parallel CompactPCI® bus delivers enough performance for all kinds of conventional I/O like binary or analog signals.
In addition, the system offers space for mass storage devices.
A 8HP plug-in 250W power supply unit which is accessible at the back of the system is already included and wired.
The enclosure meets EMC requirements, making it a perfect choice for embedded applications in harsh environments.
Ask us for completely configured, wired and tested systems!
General System Characteristics
Compliance with IEC 60 297-3, IEEE 1101.10
8 slots for 3U Eurocard boards (4 CompactPCI® Serial slots)
19" rack-mount standard
3U card vertical
Dimensions: 3U, 84HP, 278mm depth
CompactPCI®/CompactPCI® Serial Backplane
CompactPCI® PlusIO system slot on the fourth slot from the left
Support of four CompactPCI® Serial peripheral slots
Three CompactPCI® peripheral slots
Four CompactPCI® Serial peripheral slots
Plug-in power supply
90V..264V AC wide range
3.3 V/40A, 5 V/40A, 12V/5.5A, -12 V/2A
3U power backplane with P47 receptacle
3U power input module with IEC input, fuse holder, line filter and power switch
Power connector and power-on switch at the back
1U fan chassis
Two vertical fans
Air flow volume 140 m³/h (manufacturer's data)
Dimensions 119 x 119 x 32 mm
Sound pressure level 39 dB(A)
Temperature range (operation):
Temperature range (storage):
Power supply: -20..+65°C without derating
Standard CPCI to CPCI Serial Hybrid Rack for Single Eurocards Models
MEN delivers turn-key systems completely installed (hardware, operating system, accessories), wired and tested. Different rack sizes, power supplies and backplanes on request. For details please contact your local sales representative.
CompactPCI® 19" 4U/84HP rack-mount enclosure for 3U cards (vertical), 4+4-slot 3U CompactPCI® / CompactPCI® Serial hybrid backplane, prepared for rear I/O, 250W power supply wide range 90..264VAC on rear, 1U fan tray with 2 fans included, 0..+60°C