Auto-negotiation
High-speed non-blocking, store-and-forward switching
8K MAC address lookup table with automatic learning and aging
QoS (Quality of Service) support with 4 traffic classes (IEEE 802.1p tagged frames)
Layer 2 switching
Back pressure or IEEE802.3x flow control
Automatic MDI/MDI-X crossover (all ports)
TCP/IP (IPv4, IPv6)
Layer 2 Features
Transparent bridging
QoS (DiffServ) and 802.1p traffic prioritization queuing, polishing, shaping
VLAN-aware bridging
Security Features
MAC based and IP based access list (ACL) for traffic filtering
Rate-limiting and storm control to prevent packet flooding from malicious peers
Supported Ethernet Standards
Transparent bridging: IEEE 802.1d, 2004
VLAN: IEEE 802.1q Rev D5.0, 2005
Port based VLANs: IEEE 802.1q Rev D5.0, 2005
Link aggregation: IEEE 802.3ad, 2005
Power over Ethernet support: IEEE 802.1af
Priority based switching: IEEE 802.1p
Power Over Ethernet Features
Power over Ethernet functions on ports 1 and 2
•
PSE (Power Sourcing Equipment) function
•
Supplies one PD class 0 device or two PD class 2 devices (up to 15W total)
Service Interface
9-pin D-Sub connector at front
SPI interface for external SPI programmer
Front I/O
8 Ethernet ports via RJ45 connectors
1 service interface via 9-pin D-Sub plug connector
1 power input via mixed 7-pin D-Sub plug connector
16 link and activity Ethernet status LEDs (2 per channel)
4 Power over Ethernet status LEDs, 2 each for ports 1 and 2
Status LEDs for power and reset
Electrical Specifications
Power supply unit
•
14.4..154 VDC wide range according to EN 50155
Isolation (according to EN 50155)
•
Input/output: 1500 Vrms
•
Input/shield: 1500 Vrms (7W2 D-Sub power connector: 1000 Vrms)
•
Output/shield: 1500 Vrms
•
Ground/shield: 1500 Vrms
•
Service connector: 1000 Vrms
Power consumption: tbd. W
MTBF: 489,962 h @ 40°C according to IEC/TR 62380 (RDF 2000)
Mechanical Specifications
19" rack-mount standard
Dimensions: 3U, 18HP, 168 mm depth
Weight: 870 g
Environmental Specifications
Temperature range (operation):
•
-40..+70°C (qualified components, +85°C for ten minutes according to EN 50155 Class Tx)
Temperature range (storage): -40..+85°C
Relative humidity (operation): max. 95% non-condensing
Relative humidity (storage): max. 95% non-condensing
Altitude: -300 m to + 3,000 m
Shock: according to EN 60068-2-27
Bump: according to EN 60068-2-29
Vibration (sinusoidal): according to EN 60068-2-6
Safety
PCBs manufactured with a flammability rating of 94V-0 by UL recognized manufacturers
EMC
Tested according to EN 55022 (radio disturbance), EN 61000-4-2 (ESD), EN 61000-4-4 (burst) and EN 61000-4-5 (surge)
