XC2 - ESMexpress® COM Carrier Board for Intelligent Displays

J1 and J2 assembled

Mechanical Specifications

Dimensions: 233.45 x 240 x 21.8 mm
• Fit for installation in housing of 12 to 19" displays

Weight: >300 g

Memory

1 SATA connector
• UDMA 5 supported

2 USB-driven Flash disk slots
• 4 GB Flash Memory (standard, up to 32 GB possible)

Graphics

1 LVDS 25-pin connector
• For direct connection of an LVDS display

1 LVDS backlight 10-pin connector

1 LVDS via SDVO or 1 DVI via SDVO

Supported DVI resolutions (depending on operating system/software):
• 640x480 (VGA) with aspect ratio 4:3
• 800x600 (SVGA) with aspect ratio 4:3
• 1024x768 (EXGA) with aspect ratio 4:3
• 1152x864 (XGA) with aspect ratio 4:3
• 1280x800 (WXGA) with aspect ratio 16:10
• 1280x960 (SXGA) with aspect ratio 4:3
• 1400x1050 (SXGA+) with aspect ratio 4:3
• 1600x1200 (UXGA) with aspect ratio 4:3 up to 60 Hz
• 1920x1200 (WUXGA) with aspect ratio 16:10 up to 60 Hz

PCI Express®

2 PCIe® x1

USB

6 USB 2.0 (480 Mbit/s)
• Used for Flash Disk (2x), SA-Adapter™ slot and optional PCI Express® Mini Card slot
• 2 USB connectors on interface board

10/100Base-T Ethernet

2 Fast Ethernet
• Switch functionality
• Full duplex mode supported

SMBus

1 SMBus
• For communication between board components

I/O via interface board

USB 2.0
• 2 USB Type A connectors

10/100Base-T Ethernet
• 2 M12 Ethernet connectors

SA-Adapter™ slot
• 1 serial interface realized via SA-Adapter™, e.g., RS232 or RS422, isolated or not, GPS

5 binary inputs via mixed 7W2 D-sub power connector
• 1 for key input functionality
• 4 universal inputs, e.g., for geographical addressing

Intelligent Power Supply with Controller

Input voltage supervision

Temperature supervision via LM50 sensor

Backlight control (turns off display at extreme temperatures)

Buffer functionality for RTC and BIOS CMOS

Reset of CPU board possible

Wake on Time

Watchdog

Key input functionality

Accessible via SMBus

Electrical Specifications

Supply voltage/power consumption:
• 24 VDC (+/- 40%) power supply according to EN 50155

MTBF

MTBF: 212,503 h @ 40°C according to IEC/TR 62380 (RDF 2000)

Environmental Specifications

Temperature range (operation):
• -40..+70°C (up to +85°C for 10 minutes - compliant with EN 50155, class Tx railway standard )
• Airflow depending on ESMexpress® module

Prepared for conductive cooling (via connection from mounting frame to metal display housing)

Temperature range (storage): -40..+85°C

Relative humidity (operation): max. 95% non-condensing

Relative humidity (storage): max. 95% non-condensing

Altitude: -300 m to + 2,000 m

Bump: 10 g/16 ms

Conformal coating on request

Safety

PCB manufactured with a flammability rating of 94V-0 by UL recognized manufacturers

Up to 6 USB 2.0 host ports (or 5 host ports and 1 client port) available at interface board connector
• If all USBs are used some functions are not available (Serial interface and Flash disk)

HD audio
• HD audio codec
• Audio stereo in
• Audio stereo out
• SPDIF out
• All available via D-Sub connector

Serial interface
• 1 serial interface realized via SA-Adapter™, e.g., RS232 or RS422, isolated or not, IBIS

Secondary display connection
• Connection of second LVDS display possible via SDVO-to-LVDS converter (optional)
• Alternatively, connection of second display via DVI connector on interface board (with SDVO-to-DVI-D converter)

PCI Express® Mini Card slot

For functions like WIFI, WIMAX, GSM/GPRS, UMTS

PCI Express® and USB interface

Accessible via, e.g., a reverse SMA connector

SIM socket for GSM/UMTS (optional)

Electrical Specifications

Different input voltage ranges
• 48 VDC nom. (28.8..67.2 V), 35 W according to EN 50155
• 72 VDC nom. (43.2..100.8 V), 35 W according to EN 50155
• 110 VDC nom. (66..154 V), 35 W according to EN 50155
• 24/36/110 VDC nom. (14.4..154 V), 60 W according to EN 50155

As the product concept is very flexible there are many other configuration possibilities. Please contact our sales team if you do not find your required function in the options. Please note that some of these options may only be available for large volumes.

Article No.	Description
08XC02-00	Carrier board for ESMexpress® modules (Intel®), 4 GB USB Flash Disk, LVDS and DVI on board, 2 Fast Ethernet on M12, 1 SA-Adapter™ slot, 2 USB 2.0, PCI Express® Mini Card slot, 24V PSU (9..36VDC), -40..+85°C with qualified components

Article No.	Description	More
15XM01L00	Intel® Atom™ Z530P, 1.6 GHz, 1 GB DDR2 RAM, 1 Gb Ethernet, 1x PCIe®, with cover, -40..+85°C Tcase screened	More info
15XM01L02	Intel® Atom™ Z510P, 1.1 GHz, 512 MB DDR2 RAM, 1 Gb Ethernet, 1x PCIe®, no J2, no cover, -40..+85°C Tcase screened	More info
15XM01-01	Intel® Atom™ Z530, 1.6 GHz, 1 GB DDR2 RAM, 2x PCIe®, -40°C..+85°C screened

Article No.	Description	More
08SA01-06	RS232, not optically isolated, -40..+85°C screened	More info
08SA02-07	RS422/485, full duplex, optically isolated, -40..+85°C screened	More info Photo
08SA03-01	RS232, optically isolated, -40..+85°C screened	More info Photo
08SA22-00	IBIS master SA-Adapter™, -40..+85°C screened	More info Photo
08SA22-01	IBIS slave SA-Adapter™, -40..+85°C screened	More info Photo
08SA25-00	GPS receiver, isolated, -40..+85°C screened	More info
08SA26-00	RS422 with 15-pin D-Sub connector, with handshake signals (RTS, CTS, DCD, DTR), coated, -40..+85°C screened

Article No.	Description	More
OS independent
To use MDIS™ low-level drivers, you also need one of the MDIS4™ or MDIS5™ system packages available for Linux, VxWorks®, QNX® or OS-9® (MDIS™ = MEN Driver Interface System).
13XC02-06	MDIS5™ low level driver sources (MEN) for XC2 PSU Control via SMBus (also used in DC1, DC2, SC21) Requires an MDIS4™/2004 or MDIS5™ system package	Download Details
Linux
This product is designed to work under Linux. See below for potentially available separate software packages from MEN.
For a Linux driver package supporting the Micrel KSZ8842-PMQLI Ethernet controller used in the XC2 and the DC1, please refer to http://www.micrel.com/page.do?page=product-info/embedded_control.jsp.
Windows
This product is designed to work under Windows®. See below for potentially available separate software packages from MEN.
For a Windows® driver package supporting the Micrel KSZ8842-PMQLI Ethernet controller used in the XC2 and the DC1, please refer to http://www.micrel.com/page.do?page=product-info/embedded_control.jsp.

For operating systems not mentioned here contact MEN sales.

Article No.	Description	More
08XC02-DS	XC2 Data Sheet (PDF)	Download
20XC02-00	XC2 User Manual (PDF)	Download