PP4 - PCI-104 COM Module with MVB Interface

Electrical Middle Distance (EMD) medium
• RS485/422 transceiver

Option: ESD (Electrical Short Distance medium) and OGF (Optical Glass Fiber medium), on request

Accessible on two 9-pin D-Sub front connectors

Memory

16MB SDRAM system memory
• Traffic Memory for MVB interface

2MB Flash
• For FPGA configuration data

PCI Interface

32-bit/33-MHz PCI interface at PCI-104 connector J1

PCI signaling voltage (VI/O): 3.3V (5V tolerant)

Miscellaneous

Two yellow onboard LEDs to signal MVB activity

Electrical Specifications

Isolation voltage: 1500V DC / 1000V AC between isolated side and digital side

Supply voltage/power consumption:
• +5V, ±5%, 140mA typ.
• +3.3V, +3.3V..+3.6V, 300mA

MTBF: 498,000 @ 40°C (derived from MIL-HDBK-217F)

Mechanical Specifications

Dimensions: conforming to PCI-104 specification

Weight: 72g

Environmental Specifications

Temperature range (operation):
• -40..+85°C
• Airflow: min. 10m³/h

Temperature range (storage): -40..+85°C

Relative humidity (operation): max. 95% non-condensing

Relative humidity (storage): max. 95% non-condensing

Altitude: -300m to + 3,000m

Shock: 15g/11ms

Bump: 10g/16ms

Vibration (sinusoidal): 2g/10..150Hz

Conformal coating (standard)

Safety

PCB manufactured with a flammability rating of 94V-0 by UL recognized manufacturers

EMC

Tested according to EN 55022 (radio disturbance), IEC1000-4-2 (ESD) and IEC1000-4-4 (burst)

Software Support

MEN Driver Interface System (MDIS™ for Windows®, Linux, VxWorks®, QNX®, OS-9®)

The PP4 together with these drivers supports MVB slave functionality only, it is to be used together with an MVB bus administrator.

For more information on supported operating system versions and drivers see Software.

ESD

OGF

MVB Connectors

Two 10-pin onboard connectors instead of 9-pin D-Sub connectors at the front

Memory

System RAM
• 16 MB

Flash
• 2 MB

Operation Temperature

-40..+85°C

Please note that some of these options may only be available for large volumes. Please ask our sales staff for more information.

Article No.	Description	More
OS independent
To use MDIS™ low-level drivers, you also need one of the MDIS4™ or MDIS5™ system packages available for Linux, VxWorks®, QNX® or OS-9® (MDIS™ = MEN Driver Interface System).
13PP04-06	MDIS5™ low-level driver sources (MEN) for PP4 Requires an MDIS4™/2004 or MDIS5™ system package	Download Details
Windows
This product is designed to work under Windows®. See below for potentially available separate software packages from MEN.
13PP04-70	MDIS4™/2004/MDIS5™ Windows® driver (MEN) for PP4 Requires a compatible MDIS™ system package	Download Details

For operating systems not mentioned here contact MEN sales.