48-channel GPS (Global Positioning System) receiver based on SiRF® IV
GPS Band/Code: L1 frequency, C/A code, SPS
Integrated TCXO, RTC
Accuracy (unaided):
Position: 2.5 m (CEP50)
Velocity: 0.01 m/s (50%)
Time: 1 us (typ.)
Time To First Fix (TTFF):
Cold start: 35 s typ.
Warm start: 35 s typ.
Hot start: 1 s typ.
Sensitivity:
Acquisition (cold): - 147 dBm
Re-Acquisition: - 162 dBm
Tracking: -163 dBm
Protocol: NMEA 0183 (configurable to SiRF® binary OSP)
One SMA antenna connector at front panel
For the use of an external active or passive antenna
Rugged screw connection
Outside thread
Inner conductor female
Host Interface
5V TTL COM port
Data transfer rate configurable (default: 4,800 Baud 8N1)
Installation
As a piggy-back board directly on a carrier board
Via ribbon cable
Electrical Specifications
Isolation voltage:
Galvanic isolation: 2.5 kVAC between isolated side and digital side
Supply voltage/power consumption:
+5V (-3%/+5%), 120 mA without antenna, 190 mA with antenna (depends on used antenna)
Max. supported power consumption for active antenna: +5V / 70 mA
Impedance: 50 Ohm
MTBF: 826,041 h @ 40°C according to IEC/TR 62380 (RDF 2000)
Mechanical Specifications
Dimensions: 32 mm x 42 mm
Weight: 20 g
Environmental Specifications
Temperature range (operation):
-40..+85°C (qualified)
Airflow: min. 1 m/s
Temperature range (storage): -40..+85°C
Relative humidity (operation): max. 95% non-condensing
Relative humidity (storage): max. 95% non-condensing
Altitude: -300 m to + 3,000 m
Shock: 15 g, 11 ms
Bump: 10 g, 16 ms
Vibration (sinusoidal): 1 g, 10..150 Hz
Conformal coating on request
Safety
PCB manufactured with a flammability rating of 94V-0 by UL recognized manufacturers
EMC
Tested according to EN 50121-3-2 (table 4,5,6), EN 55011 (radio disturbance), EN 61000-4-2 (ESD), EN 61000-4-3 (electromagnetic field immunity), EN 61000-4-4 (burst), EN61000-4-5 (surge), EN61000-4-6 (immunity to conducted disturbances)
