MM1 - ESMini™ COM with Intel® Atom™

Chipset
• Intel® system controller hub US15W

Memory

512 KB L2 cache integrated in Atom processor

Up to 1 GB DDR2 SDRAM system memory
• Soldered
• 400/533 MHz memory bus frequency locked to the FSB frequency

Serial ATA (SATA)

One port via ESMini™ connector

Transfer rates up to 100 MB/s

Via PATA-to-SATA converter

Graphics

Integrated in Intel® System Controller Hub US15W

Maximum resolution: 1366x768 pixels

1 SDVO port

1 LVDS port
• 112 MHz maximum pixel clock
• 18 or 24 bits pixel color depths

Available via ESMini™ connector

USB

Eight USB 2.0 host ports (or 7 host ports and 1 client port, adjustable by software)
• Via ESMini™ connector
• Six of these ports also support USB 1.1 (UHCI implementation)

EHCI implementation

Data rates up to 480 Mbit/s

Ethernet

Up to two 10/100Base-T Ethernet channels

Two status LEDs per channel

Available via ESMini™ connector

UART

Two interfaces

RS232 or RS422/RS485

Full or half-duplex

Data rates up to 115,200 bit/s

60-byte transmit/receive buffer

Handshake lines: RTS, CTS

Available via ESMini™ connector

CAN bus

Two CAN bus channels

2.0 A/B CAN protocol

Data rates up to 1 Mbit/s

Available via ESMini™ connector

I²C Bus

Two interfaces

Available via ESMini™ connector

PCI Express®

One x1 link to connect legacy I/O (FPGA)

One x1 link via ESMini™ connector

Data rate 250 MB/s in each direction (2.5 Gbit/s per lane)

GPIO

One line from board controller on ESMini™ connector J1

Three lines from FPGA on ESMini™ connector J1

Up to 19 differential pairs of receive and transmit lines on ESMini™ connector J2

Up to 116 single I/O lines on ESMini™ connector J2

HD Audio

Via ESMini™ connector

Board Management Controller

Input voltage supervision

Power sequencing

Board monitoring

Watchdog

Accessible via SMBus

Miscellaneous

Real-time clock (with Goldcap or battery backup on the carrier board)

SMBus interface

Electrical Specifications

Supply voltage: +5V (-3%/+5%)

Power consumption:
• 1.1 GHz Z510 model: 6.75 W typ., 7.7 W max.
• 1.6 GHz Z530 model: 7.5 W typ., 9.3 W max.

Mechanical Specifications

Dimensions: 95 mm x 55 mm

ESMini™ PCB mounted between a frame and a cover

Weight: 130 g (with cover and frame)

Environmental Specifications

Temperature range (operation):
• -40..+85°C Tcase (ESMini™ cover/frame) (screened) (board versions with 512 MB DDR2 SDRAM)
• -25..+85°C Tcase (ESMini™ cover/frame) (screened) (board versions with 1 GB DDR2 SDRAM)

Temperature range (storage): -40..+85°C

Relative humidity (operation): max. 95% non-condensing

Relative humidity (storage): max. 95% non-condensing

Altitude: -300 m to + 3,000 m

Shock: 15 g/11 ms (EN 60068-2-27)

Bump: 10 g/16 ms (EN 60068-2-29)

Vibration (sinusoidal): 1 g/10..150 Hz (EN 60068-2-6)

Conformal coating on request

MTBF

221,026 h @ 40°C according to IEC/TR 62380 (RDF 2000)

Safety

PCB manufactured with a flammability rating of 94V-0 by UL recognized manufacturers

EMC

EMC behavior depends on the system and housing surrounding the ESMini™ module. MEN has performed general, successful EMC tests for ESMini™ using the XC4 evaluation carrier according to EN 55022 (radio disturbance), IEC 61000-4-2 (ESD), IEC 61000-4-3 (electromagnetic field immunity), IEC 61000-4-4 (burst), IEC 61000-4-5 (surge) and IEC 61000-4-6 (conducted disturbances)

BIOS

Award BIOS

Software Support

Windows®
• Windows® XP
• Windows® Vista™
• Windows® 7
• Windows® XP Embedded
• Windows® Embedded Standard 7

Linux (in preparation)

VxWorks® (on request)

QNX® (on request)

For more information on supported operating system versions and drivers see Downloads.

Intel® Atom™ Z510, 1.1 GHz

Memory

System RAM
• 512 MB or 1 GB

I/O

Second Fast Ethernet port

Second CAN port

PCI Express®

Second PCI Express® lane on ESMini™ connector
• Instead of FPGA (GPIO, CAN, UART, Fast Ethernet, I²C)

Operating Temperature

-40..+85°C Tcase (ESMini™ cover/frame) (screened) (board versions with 512 MB DDR2 SDRAM)

-25..+85°C Tcase (ESMini™ cover/frame) (screened) (board versions with 1 GB DDR2 SDRAM)

Cooling

With cover and frame

With cooling plate

With small heat sinks only on processor and chipset

BIOS

Accessible via UART using VT100 terminal

Software Support

VxWorks® (on request)

QNX® (on request)

Please note that some of these options may only be available for large volumes. Please ask our sales staff for more information.

Article No.	Description	More
15MM01-00	Intel® Atom™ Z510, 1.1 GHz, 512MB RAM, 1 Fast Ethernet, 1 CAN, -40..+85°C Tcase screened	Photo
15MM01-01	Intel® Atom™ Z530, 1.6 GHz, 1GB RAM, 2 Fast Ethernet, 2 CAN, -25..+85°C Tcase screened	Photo

Article No.	Description	More
08XC04-00	Evaluation and development board for all ESMini™ modules, 0..+60°C, incl. 2 GB USB Flash Disk and SA-Adapters™ for 1 RS232 and 1 CAN bus	More info Photo
08XC06-01	Carrier board for ESMini™: 1x TTY, 1x RS232, 1x DVI-I, 1x Audio I/O, 4x USB2.0, 2x Fast Ethernet, USB Flash slot, PCI Express® Mini Card socket, SIM card holder, microSD™ card socket, 8x GPIOs, -40°C..+85°C screened	More info Photo

Article No.	Description	More
0712-0019	Standard ATX PSU, 350 W, 0..+40°C	Photo
08XC04-00	Evaluation and development board for all ESMini™ modules, 0..+60°C, incl. 2 GB USB Flash Disk and SA-Adapters™ for 1 RS232 and 1 CAN bus	More info Photo
08XC06-01	Carrier board for ESMini™: 1x TTY, 1x RS232, 1x DVI-I, 1x Audio I/O, 4x USB2.0, 2x Fast Ethernet, USB Flash slot, PCI Express® Mini Card socket, SIM card holder, microSD™ card socket, 8x GPIOs, -40°C..+85°C screened	More info Photo

Article No.	Description	More
Linux
This product is designed to work under Linux. See below for potentially available separate software packages from MEN.
13XM01-06	MDIS5™ low-level driver sources (MEN) for XM1, XM1L, MM1, XM2, F11S, F19P, F21P, G20, SC21 and DC2 board controller Requires an MDIS4™/2004 or MDIS5™ system package	Download Details
13Z015-06	MDIS5™ low-level driver sources (MEN) for 16Z029_CAN (MSCAN/Layer2) Requires an MDIS4™/2004 or MDIS5™ system package	Download Details
13Z016-06	MDIS5™ driver (MEN) for 16Z029_CAN (CANopen master) Requires an MDIS4™/2004 or MDIS5™ system package	Details
13Z017-06	MDIS5™ low-level driver sources (MEN) for 16Z034_GPIO and 16Z037_GPIO Requires an MDIS4™/2004 or MDIS5™ system package	Download Details
13Z025-90	Linux native driver (MEN) for 16Z025_UART, 16Z057_UART and 16Z125_UART	Download Details
13Z077-90	Linux native driver (MEN) for 16Z077_ETH and 16Z087_ETH	Download Details
Windows
This product is designed to work under Windows®. See below for potentially available separate software packages from MEN.
10F014-78	Windows® XP Embedded BSP (MEN) for F11S, F14, F15, F17, F18, F19P, F21P, G20, XM1, XM1L, XM2, MM1, MM2, SC21, SC24, DC1, DC2, RC1 and BC50M	Download Details
10Y000-78	Windows® Embedded Standard 7 BSP for F11S, F19P, F21P, G20, XM1L, XM2, MM1, MM2, SC21, SC24, BC50M, F206, F210, F215, F216, G215, P506, P507 and P511	Download Details
13MM01-77	Windows® Installset (MEN) for MM1 and RC1 Includes all free drivers developed by MEN for the supported hardware.	Download w/o System Package Download with System Package Details
13T009-70	Windows® HD audio driver (Realtek) for XM1, XM1L, MM1, MM2	Download Details
13T011-70	Windows® graphics driver (Intel®) for XM1, XM1L, MM1 and F11S	Download Details
13T012-70	Windows® XP/Vista chipset driver (Intel®) for XM1, XM1L, MM1 and F11S	Download Details
13T013-70	Windows® USB client driver installation package (Intel®) for XM1, XM1L and MM1	Download Details
13T014-70	Windows® Vista™ HD audio driver (Realtek) for XM1, XM1L and MM1	Download Details
13T016-70	Windows® Vista™ chipset graphics driver (Intel®) for XM1, XM1L, MM1 and F11S	Download Details
13Z015-70	MDIS4™/2004/MDIS5™ Windows® driver (MEN) for 16Z029_CAN (MSCAN/Layer2) Requires a compatible MDIS™ system package	Download Details
13Z016-70	MDIS5™ Windows® driver (MEN) for 16Z029_CAN (CANopen master) Requires an MDIS4™/2004 or MDIS5™ system package	Download Details
13Z017-70	MDIS4™/2004 / MDIS5™ Windows® driver (MEN) for 16Z034_GPIO devices Requires a compatible MDIS™ system package	Download Details
13Z087-70	Windows® native driver (MEN) for 16Z087_ETH (Ethernet controller)	Download Details
Firmware/BIOS
MEN's CANopen firmware consists of the Vector Informatik protocol stack. The corresponding driver software comes from MEN. It is based on MDIS™ (MEN Driver Interface System), which makes the hardware ready for use under Windows®, Linux, VxWorks®, QNX®, OS-9® and other software environments. You can find more information on the Vector CANopen tools at www.vector-informatik.de.
Miscellaneous
Intel® software development products such as analyzers, compilers, threading tools etc. can be downloaded under www.intel.com/cd/software/products/asmo-na/eng/index.htm. IA-32 Intel® Architecture Software Developer's Manuals are available under www.intel.com/products/processor/manuals/index.htm.

For operating systems not mentioned here contact MEN sales.

Article No.	Description	More
15MM01-DS	MM1 Data Sheet (PDF)	Download
Compare Chart ESMini™ Computer-On-Modules		Download
You can find general literature on MEN computer-on-modules, including presentations about ESMexpress®, ESMini™ and their cooling concept, in our Download Library.
20APPN004	Application Note: How to make a USB stick bootable (PDF)	Download
20MM01-ER	MM1 Errata (PDF)	Download
20MM01-00	MM1 User Manual (PDF)	Download
21Z025-90	16Z025_UART and 16Z125_UART under Linux User Manual (PDF)	Download