F608 - 3U CompactPCI® Side Card for RAID Systems

Four serial ATA (SATA) ports via rear I/O
• Onboard SATA controller via one PCI Express® lane from the chipset
• Port multiplier
• Transfer rates up to 150MB/s
• RAID level 0/1/5 support

UART

Two at front panel

Physical interface using SA-Adapter™ via 10-pin connector

RS232..RS422, isolated or not

Only full duplex operation for RS422

Data rates up to 230.4kbit/s

FIFO receive and transmit buffers for high data throughput

Handshake lines: full support; lines depend on SA-Adapters™

USB

Two 2.0 host ports via rear I/O

Data rates up to 480Mbit/s

PCI Express®

Two x1 links via rear I/O

Data rate 250MB/s in each direction (2.5 Gbit/s per lane)

Miscellaneous

CompactPCI® J1 is assembled for increased mechanical stability and/or for power supply

CompactPCI® J2 is used for rear I/O

Electrical Specifications

Supply voltage/power consumption:
• +5V (-3%/+5%), 3.8A
• +3.3V (-3%/+5%),0.8A

Mechanical Specifications

Dimensions: conforming to CompactPCI® specification for 3U boards

Mountable on right side of the CPU

Weight: 150g (w/o hard disk and SA-Adapters™)

Environmental Specifications

Temperature range (operation):
• 0..+60°C
• Airflow: 1.0m/s

Temperature range (storage): -40..+85°C

Relative humidity (operation): max. 95% non-condensing

Relative humidity (storage): max. 95% non-condensing

Altitude: -300m to + 3,000m

Shock: 15g/11ms

Bump: 10g/16ms

Vibration (sinusoidal): 1g/10..150Hz

Conformal coating on request

MTBF

1,944,987h @ 40°C according to IEC/TR 62380 (RDF 2000)

Safety

PCB manufactured with a flammability rating of 94V-0 by UL recognized manufacturers

EMC

Conforming to EN 55022 (radio disturbance), IEC1000-4-2 (ESD) and IEC1000-4-4 (burst)

Software Support

Driver software can be found in the data sheet of the CPU board that you use.

I/O

Two USB on 4HP front

Two DVI on 4HP front instead of UARTs

Two DVI and two USB on 8HP front

Two DVI and two UARTS on 8HP front

Two SFP slots on 12HP front
• For optical 1000Base-LX or 1000Base-SX or copper Gigabit Ethernet interfaces
• SFP not included

Two SFP slots, two DVI and two UARTs on 16HP front

Mechanical

4HP..16HP

Please note that some of these options may only be available for large volumes. Please ask our sales staff for more information.

Description

Linux

This product is designed to work under Linux. See below for potentially available separate software packages from MEN.

For a Linux driver package supporting the Silicon Imaging SiI3132 SATA controller, please refer to http://www.siliconimage.com/PRODUCTS/product.aspx?id=32 .

Windows

This product is designed to work under Windows®. See below for potentially available separate software packages from MEN.

For a Windows® driver package supporting the Silicon Imaging SiI3132 SATA controller, please refer to http://www.siliconimage.com/PRODUCTS/product.aspx?id=32 .

For operating systems not mentioned here contact MEN sales.