One 10/100Base-T channel at rear (J1 or J2)
Nine MAC units with integrated Layer 2 switch
Auto-negotiation
1K MAC address lookup table with automatic learning and aging
Layer 2 routing management
Full duplex IEEE 802.3x or half-duplex back pressure flow control
Automatic MDI/MDI-X crossover
Port speed autodetection (10/100Mbit/s)
Fixed managed operation via strapping or EEPROM at system reset time (option)
802.1p priority and port based priority
Port based VLAN
Individual port forced modes (full duplex, 100Base-TX) when auto-negotiation is disabled
Front I/O
Up to 8 Ethernet ports via RJ45 connectors or up to 6 ports via D-Sub connectors
Up to 18 link and activity Ethernet status LEDs (2 per channel, incl. 9th port)
CompactPCI® Bus
Compliance with CompactPCI® Specification 2.0 R3.0
Only one slot required on the 3U CompactPCI® bus
Peripheral slot
Compliance with PCI Specification 2.1
32-bit/33-MHz PCI-to-PCI bridge
V(I/O): +3.3V or +5V (Universal Board)
Electrical Specifications
Supply voltage/power consumption:
+5V (-3%/+5%), 1200mA max.
+3.3V (-3%/+5%), 400mA max.
MTBF: 442,000h @ 40°C (derived from MIL-HDBK-217F)
Mechanical Specifications
Dimensions: conforming to CompactPCI® specification for 3U boards
Weight: 200g
Environmental Specifications
Temperature range (operation):
-40..+85°C
Airflow: min. 10m³/h
Temperature range (storage): -40..+85°C
Relative humidity (operation): max. 95% non-condensing
Relative humidity (storage): max. 95% non-condensing
Altitude: -300m to + 3,000m
Shock: 15g/11ms
Bump: 10g/16ms
Vibration (sinusoidal): 2g/10..150Hz
Conformal coating on request
Safety
PCB manufactured with a flammability rating of 94V-0 by UL recognized manufacturers
EMC
Tested according to EN 55022 (radio disturbance), IEC1000-4-2 (ESD) and IEC1000-4-4 (burst)
Software Support
No software required except driver for 82551ER Fast Ethernet controller (9th port at rear J1)
