M37N - 4 Analog Outputs, 16 Bits

16 bits

Conversion time of D/A converter: <10.5µs

Time between trigger activation and new valid output voltage: <20µs

Output linearity: ±1LSB

Simultaneous updating of all channels

Synchronization with external trigger

Electrically isolated (500V DC isolation)

Voltage Output

Output current: ±6mA max.

Accuracy: ±0.1% (for whole temperature range)

Voltage range: -10V..+10V

Current Output

Accuracy: ±0.5% (for whole temperature range)

Current range: 0..20mA

Max. load resistance: 600 Ohm (or higher with external power supply)

Peripheral Connections

Via front panel on a shielded 25-pin D-Sub receptacle connector

Via carrier board (rear I/O)

M-Module™ Characteristics

A08, D16, INTA, IDENT

Electrical Specifications

Isolation voltage: 500V DC

Supply voltage/power consumption:
• Through M-Module™-carrier with onboard DC/DC converter: +5V (4.85V..5.25V), 270mA typ., 620mA max.
• Optional supply current for current transmitters 100 mA typ.

MTBF: 1,012,625h @ 40°C according to IEC/TR 62380 (RDF 2000)

Mechanical Specifications

Dimensions: conforming to M-Module™ Standard

Weight: 90g

Environmental Specifications

Temperature range (operation):
• -40..+85°C
• Airflow: min. 10m³/h

Temperature range (storage): -40..+85°C

Relative humidity range (operation): max. 95% non-condensing

Relative humidity range (storage): max. 95% non-condensing

Altitude: -300m to + 3,000m

Shock: 15g/11ms (according to EN60068-2-27)

Bump: 10g/16ms (according to EN60068-2-29)

Vibration (sinusoidal): 2g/10..150Hz (according to EN60068-2-6)

Conformal coating on request

Safety

PCB manufactured with a flammability rating of 94V-0 by UL recognized manufacturers

EMC

Tested according to EN55022 Class A (radio disturbance), EN61000-4-2 (ESD) and EN61000-4-4 (burst)

Software Support

MEN Driver Interface System (MDIS™ for Windows®, Linux, VxWorks®, QNX®, OS-9®)

For more information on supported operating system versions and drivers see Downloads.

Article No.	Description	More
Linux
This product is designed to work under Linux. See below for potentially available separate software packages from MEN.
13M037-06	MDIS4™/2004/MDIS5™ low-level driver sources (MEN) for M37 and M37N Requires a compatible MDIS™ system package	Download Details
Windows
This product is designed to work under Windows®. See below for potentially available separate software packages from MEN.
13M037-70	MDIS4™/2004/MDIS5™ Windows® driver (MEN) for M37 and M37N Requires a compatible MDIS™ system package	Download Details
VxWorks
This product is designed to work under VxWorks®. For details regarding supported/unsupported board functions please refer to the corresponding software data sheets.
13M037-06	MDIS4™/2004/MDIS5™ low-level driver sources (MEN) for M37 and M37N Requires a compatible MDIS™ system package	Download Details
QNX
This product is designed to work under QNX®. For details regarding supported/unsupported board functions please refer to the corresponding software data sheets.
13M037-06	MDIS4™/2004/MDIS5™ low-level driver sources (MEN) for M37 and M37N Requires a compatible MDIS™ system package	Download Details
OS-9
This product is designed to work under OS-9®. For details regarding supported/unsupported board functions please refer to the corresponding software data sheets.
13M037-06	MDIS4™/2004/MDIS5™ low-level driver sources (MEN) for M37 and M37N Requires a compatible MDIS™ system package	Download Details

For operating systems not mentioned here contact MEN sales.