M37N - 4 Analog Outputs, 16 Bits

16 bits

Conversion time of D/A converter: <10.5µs

Time between trigger activation and new valid output voltage: <20µs

Output linearity: ±1LSB

Simultaneous updating of all channels

Synchronization with external trigger

Electrically isolated (500V DC isolation)

Voltage Output

Output current: ±6mA max.

Accuracy: ±0.1% (for whole temperature range)

Voltage range: -10V..+10V

Current Output

Accuracy: ±0.5% (for whole temperature range)

Current range: 0..20mA

Max. load resistance: 600 Ohm (or higher with external power supply)

Peripheral Connections

Via front panel on a shielded 25-pin D-Sub receptacle connector

Via carrier board (rear I/O)

M-Module™ Characteristics

A08, D16, INTA, IDENT

Electrical Specifications

Isolation voltage: 500V DC

Supply voltage/power consumption:
• Through M-Module™-carrier with onboard DC/DC converter: +5V (4.85V..5.25V), 270mA typ., 620mA max.
• Optional supply current for current transmitters 100 mA typ.

MTBF: 1,012,625h @ 40°C according to IEC/TR 62380 (RDF 2000)

Mechanical Specifications

Dimensions: conforming to M-Module™ Standard

Weight: 90g

Environmental Specifications

Temperature range (operation):
• -40..+85°C
• Airflow: min. 10m³/h

Temperature range (storage): -40..+85°C

Relative humidity range (operation): max. 95% non-condensing

Relative humidity range (storage): max. 95% non-condensing

Altitude: -300m to + 3,000m

Shock: 15g/11ms (according to EN60068-2-27)

Bump: 10g/16ms (according to EN60068-2-29)

Vibration (sinusoidal): 2g/10..150Hz (according to EN60068-2-6)

Conformal coating on request

Safety

PCB manufactured with a flammability rating of 94V-0 by UL recognized manufacturers

EMC

Tested according to EN55022 Class A (radio disturbance), EN61000-4-2 (ESD) and EN61000-4-4 (burst)

Software Support

MEN Driver Interface System (MDIS™ for Windows®, Linux, VxWorks®, QNX®, OS-9®)

For more information on supported operating system versions and drivers see Software.

Article No.	Description	More
04M037N00	4 analog current/voltage outputs, DC/DC converter, -40...+85°C with qualified components	Photo

Article No.	Description	More
05M000-00	M-Module™ cable, 2m, with 25-pin D-Sub plug/housing to pig tail	Photo
05M000-17	25 mounting screw sets to fix M-Modules™ on carrier boards	Photo

Article No.	Description	More
OS independent
To use MDIS™ low-level drivers, you also need one of the MDIS4™ or MDIS5™ system packages available for Linux, VxWorks®, QNX® or OS-9® (MDIS™ = MEN Driver Interface System).
13M037-06	MDIS4™/2004/MDIS5™ low-level driver sources (MEN) for M37 and M37N Requires a compatible MDIS™ system package	Download Details
Windows
This product is designed to work under Windows®. See below for potentially available separate software packages from MEN.
13M037-70	MDIS4™/2004/MDIS5™ Windows® driver (MEN) for M37 and M37N Requires a compatible MDIS™ system package	Download Details

For operating systems not mentioned here contact MEN sales.

Article No.	Description	More
04M037NDS	M37N Data Sheet (PDF)	Download
20M000-00	M-Module™ Draft Specification, Rev. 3.0 (PDF)	Download
20M037N00	M37N User Manual (PDF)	Download