Rugged Computer Boards and Systems for
Harsh, Mobile and Mission-Critical Environments

Home > Products > I/O by Function > Fieldbuses > P699

CompactPCI

CompactPCI Serial/PlusIO

VMEbus

Computer-On-Modules (COM)

Networks & Connectivity

Box & Display Computers

Pages related to P699

Compare mezzanine functions on PMC/XMC and PC-MIP

Collect your favorite products in My MEN!

P699 - FPGA-based USM™ Main XMC

Overview
Technical Data
Ordering Information
Downloads

Log in to add P699 to My MEN or to view your favorites

Photo

Diagram

Main Features

Main XMC for USM™ Universal Submodules
PCIe® 2.5 Gbit/s
1 USM™ slot
1 FPGA 24 624 LEs (for user-defined I/O)
32 MB DDR2 SDRAM
4 MB Flash
-10 to +70°C screened

Description Open

USM™ Universal Submodules make XMC modules more flexible than ever. The main XMC P699 gets its specific function through the IP cores implemented inside the onboard FPGA. This function can be changed at any time through implementation of different IP cores. The corresponding line drivers are realized on the USM™ which is simply plugged on the P699.

(continued)

Technical Data Open

Functionality

User-defined through FPGA

(continued)

Line drivers and/or additional hardware implemented on USM™ Universal Submodule (not included)

Memory

32MB SDRAM memory
• Soldered
• DDR2
• 133MHz memory bus frequency
• FPGA-controlled

4MB non-volatile Flash
• For FPGA configuration data
• FPGA-controlled
• Serial SPI Flash, 33MHz

FPGA

Standard factory FPGA configuration:
• Chameleon Table V2
• PCI Express® interface/PCIe® to Wishbone bridge
• ID EEPROM emulation
• 16Z069_RST - Reset controller
• 16Z052_GIRQ - Interrupt controller
• 16Z001_SMB - SMBus controller
• 16Z126_SERFLASH - Serial Flash interface
• 16Z043_SDRAM - DDR2 SDRAM controller
• 16Z125_UART - UART controller
• 16Z034_GPIO - GPIO controllers (3 IP cores, for onboard LEDs and 16-bit I/O)

The FPGA offers the possibility to add customized I/O functionality. See FPGA.

USM™ Slot

One slot for a standard USM™ module

For implementation of line drivers and/or additional hardware

Miscellaneous

Eight front-panel LEDs, FPGA-controlled

I²C interface to detect the USM™ module

XMC Characteristics

Compliant with XMC standard VITA 42.3-200x

PCI Express® links: one x1

PCI Express®

One x1 link

Data rate 250MB/s in each direction (2.5 Gbit/s per lane)

Peripheral Connections

Via front panel on a shielded 50-pin HP D-Sub SCSI 2 receptacle connector

Electrical Specifications

Isolation voltage:
• Voltage depends on implementation and signal routing of USM™

Supply voltage/power consumption:
• +5V and +12V (-5%/+5%)
• +3.3V (-5%/+5%)
• Consumption depends on FPGA and USM™ configuration

Mechanical Specifications

Dimensions: conforming to IEEE 1386.1

Weight: 70g (w/o USM™ module)

Environmental Specifications

Temperature range (operation):
• -10..+70°C (screened)
• Airflow: min. 10m³/h

Temperature range (storage): -40..+85°C

Relative humidity (operation): max. 95% non-condensing

Relative humidity (storage): max. 95% non-condensing

Altitude: -300m to + 3,000m

Shock: 15g/11ms

Bump: 10g/16ms

Vibration (sinusoidal): 2g/10..150Hz

Conformal coating on request

MTBF

757,662h @ 40°C according to IEC/TR 62380 (RDF 2000)

Safety

PCB manufactured with a flammability rating of 94V-0 by UL recognized manufacturers

EMC

Conforming to EN 55022 (radio disturbance), IEC1000-4-2 (ESD) and IEC1000-4-4 (burst)

Software Support

Flash update tools for Windows®, Linux, VxWorks®

Driver software depending on implemented FPGA functions

UART driver software for Windows® on request

For more information on supported operating system versions and drivers see Software.

FPGA

This product offers the possibility to add customized I/O functionality in FPGA.

(continued)

Standard P699 Models

Article No.	Description	More
15P699-00	USM™ main XMC, -10..+70°C screened	Photo

Miscellaneous Accessories

Article No.	Description
05P599-00	PMC/M-Module™ cable, 2m, with 50-pin HP D-Sub 50 M both sides, 0..+60°C
08US00-00	Universal Submodule for prototyping, -40..+85°C qualified

Software

Documentation Open

Article No.	Description	More
OS independent
To use MDIS™ low-level drivers, you also need one of the MDIS4™ or MDIS5™ system packages available for Linux, VxWorks®, QNX® or OS-9® (MDIS™ = MEN Driver Interface System).
13Z017-06	MDIS5™ low-level driver sources (MEN) for 16Z034_GPIO and 16Z037_GPIO Requires an MDIS4™/2004 or MDIS5™ system package	Download Details
Linux
This product is designed to work under Linux. See below for potentially available separate software packages from MEN.
13Z025-90	Linux native driver (MEN) for 16Z025_UART, 16Z057_UART and 16Z125_UART	Download Details
13Z100-91	Linux FPGA update tool (MEN)	Download Details
Windows
This product is designed to work under Windows®. See below for potentially available separate software packages from MEN.
13Z017-70	MDIS4™/2004 / MDIS5™ Windows® driver (MEN) for 16Z034_GPIO devices Requires a compatible MDIS™ system package	Download Details
13Z100-70	Windows® FPGA update tool (MEN)	Download Details
VxWorks
This product is designed to work under VxWorks®. For details regarding supported/unsupported board functions please refer to the corresponding software data sheets.
13Z025-60	VxWorks® native driver (MEN) for 16Z025_UART, 16Z057_UART and 16Z125_UART	Download Details
13Z100-60	VxWorks® FPGA update tool (MEN)	Download Details
QNX
This product is designed to work under QNX®. For details regarding supported/unsupported board functions please refer to the corresponding software data sheets.
13Z100-40	QNX® FPGA update tool (MEN)	Download Details

Article No.	Description	More
15P699-DS	P699 Data Sheet (PDF)	Download
20P699-00	P699 User Manual (PDF)	Download
20US00-00	USM™ Specification (PDF)	Download
21M199-00	P599/M199 Programmer's Guide (PDF)	Download