M62N - 16 Analog Outputs

Resolution:
• 16 bits with voltage outputs (bipolar operation)
• 15 bits with voltage outputs (unipolar operation)
• 15 bits with current outputs

Register write to output settle time with ±1LSB full-scale step max. 13,5µs, typ. <11,5µs

D/A-converter relative accuracy (INL) ±1LSB

Reference
• Temperature drift max. 2 ppm/°C
• Initial error max. 1mV

Voltage Output

Output current: 5mA max.

Accuracy: ±0.1%, ±1 LSB differential

Voltage ranges (programmable): 0..10V; -10V..+10V

Current Output

Accuracy: ± 0.5%

Current range : 4..20mA (other ranges possible on request)

Max. output voltage 12.5V (or higher with external power supply)

Max. load resistance 500 Ohm (or higher with external power supply)

Possible Configurations

16 voltage outputs

16 current outputs

8 voltage outputs (on request)

8 current outputs (on request)

Peripheral Connections

Via front panel on a shielded 25-pin D-Sub receptacle connector

Via carrier board (rear I/O)

M-Module™ Characteristics

A08, D16, IDENT

M-Module™ access time (timing parameter No. 3: /SELECT to /DTACK): 3,3 µs max.

Electrical Specifications

Isolation voltage:
• 500V DC between isolated side and digital side
• 500V DC isolation voltage between isolated ground and shield. Voltage between the connector shield and isolated ground is limited by a protective device (varistor); AC coupling between connector shield and isolated ground through 47nF capacitor

Supply voltage/power consumption:
• +5V (-3%/+5%), typ. 476 mA (voltage version, idle), typ. 488 mA (voltage version, output +10V), typ. 577 mA (current version, idle), typ. 661 mA (current version, 1 x 20mA)
• Optional external supply : 16V..30V (24V typ.), current drawn depending on operating conditions

MTBF: tbd. @ 40°C according to IEC/TR 62380 (RDF 2000)

Mechanical Specifications

Dimensions: conforming to M-Module™ Standard

Weight: 72g (voltage version)

Environmental Specifications

Temperature range (operation):
• -40..+85°C (qualified components)
• Airflow: min. 10m³/h

Temperature range (storage): -40..+85°C

Relative humidity range (operation): max. 95% non-condensing

Relative humidity range (storage): max. 95% non-condensing

Altitude: -300m to + 3,000m

Shock: 15g/11ms

Bump: 10g/16ms

Vibration (sinusoidal): 1g/10..150Hz

Conformal coating on request

Safety

PCB manufactured with a flammability rating of 94V-0 by UL recognized manufacturers

EMC

Conforming to IEC1000-4-2 (ESD) and IEC1000-4-4 (burst)

Software Support

MEN Driver Interface System (MDIS™ for Windows®, Linux, VxWorks®, QNX®, OS-9®)

For more information on supported operating system versions and drivers see Software.

Type

Voltage or current

Current ranges
• 4..20mA
• 0..20mA (on request)

Please note that some of these options may only be available for large volumes. Please ask our sales staff for more information.

Article No.	Description
04M062N00	16 analog outputs 0..10V, 16 bits resolution, with DC/DC converter, -40..+85°C with qualified components
04M062N01	16 analog outputs 4..20mA, 15 bits resolution, with DC/DC converter, -40..+85°C with qualified components

Article No.	Description	More
05M000-00	M-Module™ cable, 2m, with 25-pin D-Sub plug/housing to pig tail	Photo
05M000-17	25 mounting screw sets to fix M-Modules™ on carrier boards	Photo

Article No.	Description	More
OS independent
To use MDIS™ low-level drivers, you also need one of the MDIS4™ or MDIS5™ system packages available for Linux, VxWorks®, QNX® or OS-9® (MDIS™ = MEN Driver Interface System).
13M062-06	MDIS4™/2004 low-level driver sources (MEN) for M62 and M62N Requires a compatible MDIS™ system package	Download Details
Windows
This product is designed to work under Windows®. See below for potentially available separate software packages from MEN.
13M062-70	MDIS4™/2004 Windows® driver (MEN) for M62 and M62N Requires a compatible MDIS™ system package	Download Details

For operating systems not mentioned here contact MEN sales.

Article No.	Description	More
04M062NDS	M62N Data Sheet (PDF)	Download
20M062N00	M62N User Manual (PDF)	Download