
Features
Supported Operating System
Windows® XP
Windows® Vista™ 32-bit
Windows® 7 32-bit
Features
Access to Flash memory connected to the FPGA on MEN PCI/VME/M-Module™ boards supporting this feature, e.g. P18, F206, M199, P599
Included Documentation
HTML documentation
PDF user manual available as a separate download
Notes
The tool is delivered as an executable. It requires drivers (delivered/installed with the tool) to access the hardware.
This tool is built using the MDIS5™ system package build environment.
WARNING: Please be aware that you do FPGA configuration updates at your own risk. After an incorrect update your hardware may no longer be accessible.
xRevision History
-----[ 1.12 ]-----
-----[ 1.11 ]-----
-----[ 1.10 ]-----
[ 2012-03-14 13:42:28 by dpfeuffer ]
R:1. FPGA@LPCbus introduction (SC24)
2. usage information dubious
3. console output inconsistent
4. option -u doesn't work with serial flash
5. verify failed on EM10A with file EM10AIC002A2.bin
M:1. option -k added to support access over ISA/LPC bus
2. usage information completely revised
3. printfs revised
4. option -u copies FPGA header from file for serial flashes
5. bugfix in flash verify: loop must end < len instead <= len
-----[ 1.9 ]-----
[ 2010-08-26 10:45:55 by CKauntz ]
R:1. PCI Config Space Command Register not reset after changes
2. libsmb2_all_usr only relevant for VxWorks
3. SPI Flash update took very long on LINUX, UOS_MikroDelayInit needs 600ms
4. No write status on SPI flashes
5. Last byte in spi flash not programmed
6. Execution order incorrect at BIG Endian SMB flash type
M:1. Added Reset command register to the old value
2. Removed libsmb2_all_usr from MAK_LIBS and added additional section
for VxWorks
3. Moved UOS_MikroDelayInit to the init routine
4. Added current write status in verbose mode
5. Removed redundant check for length against the flash size
6. Added switches for BIG and LITTLE Endian at SMB flash types
-----[ 1.8 ]-----
[ 2009-01-13 14:42:46 by CKauntz ]
Added support for AMD and MXIC 29LV320A/D Flash
R: Write behind the flash size
M: No write or delete when address greater than flash size
No write but delete of sectors when start within but end behind the size
-----[ 1.7 ]-----
[ 2008-06-20 13:01:51 by CKauntz ]
Fixed appropriate subfileset revision
-----[ 1.6 ]-----
[ 2008-06-20 11:51:41 by CKauntz ]
Fixed Verify_Fpga to compare the whole buffer
Fixed Read and write failures at ST25P32 Flash
-----[ 1.5 ]-----
[ 2008-05-09 19:57:57 by CKauntz ]
Fixed Read and write access at different offset and length for the STM25P32 Flash
-----[ 1.4 ]-----
[ 2008-03-19 16:58:10 by CKauntz ]
added: support for the AMD29GL064A and the STM25P32 Flashes
-----[ 1.3 ]-----
[ 2007-08-10 10:53:36 by JWu ]
changed:
category of men_pci_genacc.sys.
-----[ 1.2 ]-----
[ 2007-08-07 16:24:02 by JWu ]
fpga_load.exe:
added: support for the Intel Strata flash
automatical swapping feature
Option -t for a list of all Chameleon tables
Option -d for direct addressing
-----[ 1.1 ]-----
[ 2005-07-14 13:23:07 by cs ]
Initial Revision
Close