M65 - Intelligent Dual CAN Interface

Standard and extended frames

Up to 15 message objects

Up to 1Mbit/s

ISO 11898 high speed up to 1Mbit/s, both channels optically isolated using DC/DC converters

I/O Processors

MC68331

32-bit CPU32

24MHz

Memory

1MB shared SRAM for communication and program per channel

Physical Interface

ISO high speed coupling (optically isolated)

Peripheral Connections

Via front panel on a shielded 25-pin D-Sub receptacle connector

Via carrier board (rear I/O)

M-Module™ Characteristics

A08, D16, INTA, IDENT

Electrical Specifications

Isolation voltage: 500V DC

Supply voltage/power consumption: +5V (4.85V..5.25V), 470mA max. (2 channels), 280mA (1 channel)

MTBF: 40,000h @ 50°C (derived from MIL-HDBK-217F)

Mechanical Specifications

Dimensions: conforming to M-Module™ Standard

Weight: 84g

Environmental Specifications

Temperature range (operation):
• 0..+60°C or -40..+85°C
• Airflow: min. 10m³/h

Temperature range (storage): -40..+85°C

Relative humidity range (operation): max. 95% non-condensing

Relative humidity range (storage): max. 95% non-condensing

Altitude: -300m to + 3,000m

Shock: 15g/11ms

Bump: 10g/16ms

Vibration (sinusoidal): 2g/10..150Hz

Conformal coating on request

Safety

PCB manufactured with a flammability rating of 94V-0 by UL recognized manufacturers

EMC

Tested according to EN 55022 (radio disturbance), IEC1000-4-2 (ESD) and IEC1000-4-4 (burst)

Software Support

CANopen firmware (Vector Informatik)

ICANL2 firmware and toolbox (MEN)

MEN Driver Interface System (MDIS™ for Windows®, Linux, VxWorks®, QNX®, OS-9®)

For more information on supported operating system versions and drivers see Downloads.

Operating Temperature

0..+60°C

-40..+85°C

Article No.	Description	More
Linux
This product is designed to work under Linux. See below for potentially available separate software packages from MEN.
13M065-06	MDIS5™ low-level driver sources (MEN) for M65 and P5 (CANopen firmware) Requires an MDIS4™/2004 or MDIS5™ system package	Download Details
13M065-07	MDIS5™ low-level driver sources (MEN) for M65 and P5 (CAN layer 2 firmware) Requires an MDIS4™/2004 or MDIS5™ system package	Download Details
Windows
This product is designed to work under Windows®. See below for potentially available separate software packages from MEN.
13M065-70	MDIS4™/2004/MDIS5™ Windows® driver (MEN) for M65 and P5 (CANopen firmware) Requires a compatible MDIS™ system package	Download Details
13M065-71	MDIS4™/2004 / MDIS5™ Windows® driver (MEN) for M65 and P5 (CAN Layer 2 firmware) Requires a compatible MDIS™ system package	Download Details
VxWorks
This product is designed to work under VxWorks®. For details regarding supported/unsupported board functions please refer to the corresponding software data sheets.
13M065-06	MDIS5™ low-level driver sources (MEN) for M65 and P5 (CANopen firmware) Requires an MDIS4™/2004 or MDIS5™ system package	Download Details
13M065-07	MDIS5™ low-level driver sources (MEN) for M65 and P5 (CAN layer 2 firmware) Requires an MDIS4™/2004 or MDIS5™ system package	Download Details
QNX
This product is designed to work under QNX®. For details regarding supported/unsupported board functions please refer to the corresponding software data sheets.
13M065-06	MDIS5™ low-level driver sources (MEN) for M65 and P5 (CANopen firmware) Requires an MDIS4™/2004 or MDIS5™ system package	Download Details
13M065-07	MDIS5™ low-level driver sources (MEN) for M65 and P5 (CAN layer 2 firmware) Requires an MDIS4™/2004 or MDIS5™ system package	Download Details
OS-9
This product is designed to work under OS-9®. For details regarding supported/unsupported board functions please refer to the corresponding software data sheets.
13M065-06	MDIS5™ low-level driver sources (MEN) for M65 and P5 (CANopen firmware) Requires an MDIS4™/2004 or MDIS5™ system package	Download Details
13M065-07	MDIS5™ low-level driver sources (MEN) for M65 and P5 (CAN layer 2 firmware) Requires an MDIS4™/2004 or MDIS5™ system package	Download Details
Firmware/BIOS
MEN's CANopen firmware consists of the Vector Informatik protocol stack. The corresponding driver software comes from MEN. It is based on MDIS™ (MEN Driver Interface System), which makes the hardware ready for use under Windows®, Linux, VxWorks®, QNX®, OS-9® and other software environments. You can find more information on the Vector CANopen tools at www.vector-informatik.de.

For operating systems not mentioned here contact MEN sales.