M33 - 8 Analog Outputs

12 bits

DAC conversion time 10µs

±5 LSB gain

Simultaneous update of all channels possible

Voltage Output

Output current: 5mA max.

Output linearity: ±1 LSB

Accuracy: ±0.2%, ±1 LSB differential

Voltage ranges: 0..10V; -5V..+5V; -10V..+10V

Voltage output stable up to 1µF capacitive load

Current Output

Accuracy: ± 0.5%

Current range: 0..20mA; 4..20mA

Max. output voltage 10V

Load resistance range: 0..500 Ohm

Slew Rates for Voltage Output

0V..+10V mode: switch from 0V to +10V; slew rate (SR) = 4V/µs

-5V..+5V mode: switch from -5V to +5V; slew rate (SR) = 4V/µs

-10V..+10V mode: switch from -10V to +10V; slew rate (SR) = 4V/µs

Peripheral Connections

Via front panel on a shielded 25-pin D-Sub receptacle connector

Via carrier board (rear I/O)

M-Module™ Characteristics

A08, D16, IDENT

Electrical Specifications

Isolation voltage: 500V DC

Supply voltage/power consumption:
• +5V (4.85V..5.25V), 480mA quiescent current, 600mA with 8 channels voltage output, 650mA with 4 channels current output
• External supply voltage +24V: 15.6V..30V

MTBF: 200,000h @ 50°C (derived from MIL-HDBK-217F)

Mechanical Specifications

Dimensions: conforming to M-Module™ Standard

Weight: 80g

Environmental Specifications

Temperature range (operation):
• 0..+60°C
• Industrial temperature range on request
• Airflow: min. 10m³/h

Temperature range (storage): -40..+85°C

Relative humidity range (operation): max. 95% non-condensing

Relative humidity range (storage): max. 95% non-condensing

Altitude: -300m to + 3,000m

Shock: 15g/11ms

Bump: 10g/16ms

Vibration (sinusoidal): 2g/10..150Hz

Conformal coating on request

Safety

PCB manufactured with a flammability rating of 94V-0 by UL recognized manufacturers

EMC

Tested according to EN 55022 (radio disturbance), IEC1000-4-2 (ESD) and IEC1000-4-4 (burst)

Software Support

MEN Driver Interface System (MDIS™ for Windows®, Linux, VxWorks®, QNX®, OS-9®)

For more information on supported operating system versions and drivers see Software.

Operation Temperature

0..+60°C

-40..+85°C

Article No.	Description
04M033-10	4 analog outputs, 0..+60°C
04M033-11	4 analog outputs, -40..+85°C screened
04M033-12	8 analog outputs, 0..+60°C
04M033-13	8 analog outputs, -40..+85°C screened

Article No.	Description	More
05M000-00	M-Module™ cable, 2m, with 25-pin D-Sub plug/housing to pig tail	Photo
05M000-17	25 mounting screw sets to fix M-Modules™ on carrier boards	Photo

Article No.	Description	More
OS independent
To use MDIS™ low-level drivers, you also need one of the MDIS4™ or MDIS5™ system packages available for Linux, VxWorks®, QNX® or OS-9® (MDIS™ = MEN Driver Interface System).
13M033-06	MDIS4™/2004/MDIS5™ low-level driver sources (MEN) for M33 Requires a compatible MDIS™ system package	Download Details
Windows
This product is designed to work under Windows®. See below for potentially available separate software packages from MEN.
13M033-70	MDIS4™/2004/MDIS5™ Windows® driver (MEN) for M33 Requires a compatible MDIS™ system package	Download Details

For operating systems not mentioned here contact MEN sales.

Article No.	Description	More
04M033-DS	M33 Data Sheet (PDF)	Download
20M000-00	M-Module™ Draft Specification, Rev. 3.0 (PDF)	Download
20M033-00	M33 User Manual (PDF)	Download