M22 - 8 Binary Inputs/Outputs

Output current max. 2A per channel, no derating

Inputs

Switching voltage 5V typ.

Input current 0.5mA (external switch to ground)

Miscellaneous

Load on ground

Overload protection using delay circuit

Overheating and short-circuit protection

Overvoltage protection with inductive loads

Line-break detection

Low heat production (< 0.4V loss per switch with all outputs at 2A current)

Interrupt generation for each channel

Peripheral Connections

Via front panel on a shielded 25-pin D-Sub receptacle connector or

Via screw terminal and LED display

Via carrier board (rear I/O)

M-Module™ Characteristics

A08, D08, INTA, IDENT

Electrical Specifications

Isolation voltage:
• 500V DC between isolated side and digital side
• Voltage between the connector shield and isolated ground is limited to 180V using a varistor; AC coupling between connector shield and isolated ground through 47nF capacitor

Supply voltage/power consumption: +5V (-3%/+5%), 20mA typ.

MTBF according to IEC/TR 62380 (RDF 2000)
• 908,469h @ 40°C (with D-Sub connector)
• 894,992h @ 40°C (with screw terminal)

Mechanical Specifications

Dimensions: conforming to M-Module™ Standard

Weight: 56g (with screw terminal), 68g (with D-Sub connector)

Environmental Specifications

Temperature range (operation):
• 0..+60°C
• Industrial temperature range on request
• Airflow: min. 10m³/h

Temperature range (storage): -40..+85°C

Relative humidity range (operation): max. 95% non-condensing

Relative humidity range (storage): max. 95% non-condensing

Altitude: -300m to + 3,000m

Shock: 15g/11ms

Bump: 10g/16ms

Vibration (sinusoidal): 2g/10..150Hz

Conformal coating on request

Safety

PCB manufactured with a flammability rating of 94V-0 by UL recognized manufacturers

EMC

Tested according to EN 55022 (radio disturbance), IEC1000-4-2 (ESD) and IEC1000-4-4 (burst)

Software Support

MEN Driver Interface System (MDIS™ for Windows®, Linux, VxWorks®, QNX®, OS-9®)

For more information on supported operating system versions and drivers see Software.

Operation Temperature

0..+60°C

-40..+85°C (screened, on request)

Please note that some of these options may only be available for large volumes. Please ask our sales staff for more information.

Article No.	Description	More
OS independent
To use MDIS™ low-level drivers, you also need one of the MDIS4™ or MDIS5™ system packages available for Linux, VxWorks®, QNX® or OS-9® (MDIS™ = MEN Driver Interface System).
13M022-06	MDIS4™/2004 low-level driver sources (MEN) for M22/M24 Requires a compatible MDIS™ system package	Download Details
Windows
This product is designed to work under Windows®. See below for potentially available separate software packages from MEN.
13M022-70	MDIS4™/2004 Windows® driver (MEN) for M22 and M24 Requires a compatible MDIS™ system package	Download Details

For operating systems not mentioned here contact MEN sales.