Features
Supported MEN Boards
B11
WARNING: Please be aware that you do MENMON™ updates at your own risk. After an incorrect update your CPU board may not be able to boot.
WARNING: After a MENMON™ update, the hardware revision displayed by MENMON™ will most probably be different from the actual hardware revision of your CPU board, because MENMON™ follows MEN's hardware revision updates.
Update Instructions
Unzip the file "menmon_B011.zip" into a temporary directory.
Connect a terminal emulation program with the COM1 port of your target board and set the terminal emulation program to 9600 baud, 8 data bits, 1 stop bit, no parity, no handshaking (if you haven't changed the target baudrate on your own).
If your MENMON™ console is redirected to the AD45/P10 COM1 port, you can use this port for download as well.
Power on your target board, and press "ESC" immediately.
In your terminal emulation program, you should see the "MenMon>" prompt.
Enter "SERDL MENMON™". You should now see a "C" character appear every 3 seconds.
In your terminal emulation program, start a "YModem" download of file "menmon_B011.smm" (for example, with Windows® Hyperterm, select "Transfer|Send File" Protocol="YModem").
When the download is completed, reset the target CPU board.
xRevision History
===== [ History ] =====
B011 EPROM = F1153010 MM 3.3
This Binary was compiled using the sources from Fileset MENMON™/MEN_824X_ALI/men_824x_ali revision 1.27.
To prevent conflicts with MENMON™ 2nd Edition the sources were NOT Checked-In!
changed
- enable I/O recovery feature about 8254 I/O Write Command always
necessary for ALI1543 C B1
===== [ History of fileset ART/14B011-00/14B011-00 ] =====
-----[ Revision 1.3 ]-----
[ 2004-01-26 15:31:10 by UFranke ]
1.27 26.01.2004 15:26:15 by UFranke
B011 EPROM = F1098010 MM 3.2
added
+NDL command for FLASH update via network
+NBOOT retry configurable now 1..127 or forever
+optional value parameter for C command
+cpu/mem clock in Hz to MM parameter string
fixed
-EPIC will be disabled for warm start PORT_MPC824x_EPIC_PassThrough()
-Removed WDOG show command (as it may reset board)
-----[ Revision 1.2 ]-----
[ 2003-09-19 14:48:00 by UFranke ]
B011 EPROM = F1089010 MM 3.0
added
- support for Gigabit ethernet (P9 PC-MIP®)
- support for graphic mode operation for P1/P501 (see ee-vmode)
- DBOOT command: added partition type for W95FAT16
- support to setup fixed speed settings for ethernet (eeprospeed)
fixed
- MPC8245 workaround PICR2 NO_SPRD_OPT_PRMWB
- RTC command: read regsisters twice until second register is stable
- PORT_GetDownloadAreaEnd() returned wrong address
- PS/2 keyboard:
work around for special keyboards (Siemens Fujitsu).
Fixes problems at power on (otherwise keyboard was not detected)
changed
- SDRAM TAP point from min to max
Warning: The [Revison x.y] field displayed below is an internal revision number! See the log entries to find out the MENMON™ Version for your target board!
===== [ History of fileset MENMON™/MEN_824X_ALI/men_824x_ali ] =====
-----[ Revision 1.15 ]-----
date: 2002/07/08 09:56:41; author: kp; state: Exp; lines: +17 -17
F1 MENMON™ 4.5, EPROM = F1051010
B11 MENMON™ 2.7, EPROM = F1053010
A12 MENMON™ 2.9, EPROM = F1052010
- SDRAM clock driver strength fix (for MPC8245 PCI Rev 1.2):
set ODCR DRV_MEM_CLK to 10 (20 ohms)
-----[ Revision 1.14 ]-----
date: 2002/07/03 16:06:15; author: UFranke; state: Exp; lines: +7 -7
B11 EPROM = F1050010 MENMON™ 2.6
added
-RBOOT command
-at I command MEMORY MAP
changed
-slow down FLASH timing in MCCR1 for 133MHz front side bus
fixed
- B11 VMEbridge at fix address
-----[ Revision 1.13 ]-----
date: 2002/07/02 14:41:51; author: UFranke; state: Exp; lines: +14 -12
A12 EPROM = F1049010 MENMON™ 2.8
added RBOOT command
slow down FLASH timing in MCCR1 for 133MHz front side bus
-----[ Revision 1.12 ]-----
date: 2002/06/10 10:37:03; author: kp; state: Exp; lines: +35 -34
F1 MENMON™ 4.3, EPROM = F1048010
B11 MENMON™ 2.5, EPROM = F1047010
A12 MENMON™ 2.7, EPROM = F1046010
- Enable ALI USB controller
- Improved ATA driver now uses LBA mode. Allows to boot from partitions
beyond 8GByte
- Bug fix in MMPARA_SearchKey
- Added PLL config for 400/133MHz Kahlua
- support RST command for F1 and B11
- Support network boot for EEPRO100 (P16) on F1 and B11
-----[ Revision 1.11 ]-----
date: 2002/05/21 11:15:10; author: Franke; state: Exp; lines: +25 -22
F1 EPROM = F1045010 MM 4.3
B11 EPROM = F1044010 MM 2.4
A12 EPROM = F1043010 MM 2.6
added
+ HWACT
+ added Power on Selftest results to OS support
fixed
- EE-VBLINE
- format boot device: ata=0,0 sm=0x840000 supported now
- flags scanned with 0x and stored with 0x in bootline memory
- NBOOT doesn't work with high broadcast load on network:
- Empty receive buffers after rfc951_sleep() and before doing tftp()
-----[ Revision 1.10 ]-----
date: 2002/03/15 08:27:17; author: kp; state: Exp; lines: +10 -10
added RTC command for F1/F1N, still MM 4.2!
-----[ Revision 1.9 ]-----
date: 2002/03/14 15:44:45; author: kp; state: Exp; lines: +24 -24
A12 2.5: EPROM = F1038010
F1 4.2: EPROM = F1039010
B11 2.3: EPROM = F1040010
- Bug fix: Bridge prefetchable memory filter was not initialized, causing
problems with VGA devices on CPCI
- No longer try to init a non functional VGA card forever (only 5 tries)
- added KERPAR option to BO command; BO command now case sensitive
- no longer possible to seperate command arguments with commas (otherwise
linux kernel parameters cannot contain commas)
- Added support for PPCBoot files on PReP partitions
-----[ Revision 1.8 ]-----
date: 2002/02/25 15:00:54; author: Franke; state: Exp; lines: +36 -30
MENMON™
A12 - 2.4 EPROM = F1035010
F1 - 4.1 EPROM = F1036010
B11 - 2.2 EPROM = F1037010
Changes:
- Bugfix MENMON™ FLASH protection
- added support for VGA SMI 712
- added PPCBOOT image support
- added support for EE-KERPAR for LINUX kernel parameters
-----[ Revision 1.7 ]-----
date: 2002/01/22 14:39:58; author: kp; state: Exp; lines: +6 -6
=== A12 MENMON™ 2.3 (F1034010) ===
Bug fix for 512MB SDRAM: Runaway stack must be in first 256MB,
otherwise ELF files cannot be started
-----[ Revision 1.6 ]-----
date: 2001/12/14 15:09:17; author: kp; state: Exp; lines: +15 -15
=== MENMON™ A012/D003: 2.2 ===
added support for 512MB SDRAM (13 SDRAM row bits) for 8245
changed initial SMS24 program handling for preprogrammed SMS24 parts.
-----[ Revision 1.5 ]-----
date: 2001/11/21 08:02:17; author: kp; state: Exp; lines: +4 -4
A12: don't print an error when CPCI bridge isn't present: Still R2.1
-----[ Revision 1.4 ]-----
date: 2001/11/19 14:56:48; author: kp; state: Exp; lines: +4 -4
still MENMON™ A12 R2.1
A12 bug fix: GPI0 wasn't enabled
-----[ Revision 1.3 ]-----
date: 2001/11/19 14:33:40; author: kp; state: Exp; lines: +13 -13
MENMON™ A012/D003: 2.1 (for A12 layout 0 AND 1)
A12 EPROM = F1032010
D3: Handle new CPCI bridge (layout 1)
Command I: print the processor revision register
added RST command
A12: enabled GPO1,2,3
PORT_TuneMem() bug fix in bus clock freq. rounding (appears at 133MHz)
A12: PORT_ReadAbortButton(): check additionally for ENUM signal
-----[ Revision 1.2 ]-----
date: 2001/10/30 15:14:52; author: kp; state: Exp; lines: +36 -35
=== MENMON™ B011 2.1 ===
Release for B011 only: Reason Hexswitch did not work.
Now hexswitch is ok except Bit1 which cannot be read
-- Program GPI3 as general purpose input.
-- Return GPI1 as 0 always (unreadable)
Further minor changes:
PCI-VPD command enhanced:
- bug fix in reading VPD data (previously a delay was required)
- added workaround for bad VPD CAP_ID of DEC21554
- cosmetic enhancements for PCI-VPD display
- use new routines in pci_vpd.c
PCI,PCIC,PCID commands: support multifunction devices.
(Device configuration of multifunction devs did already work)
Changes for B011:
preparations for F004
-----[ Revision 1.1 ]-----
date: 2001/07/11 15:29:41; author: kp; state: Exp;
Initial Revision
Close
Contact us
My MEN
You are logged off
Log in
Overview
RSS Feeds