Modular Train Control System: Safe I/O Card with Digital Outputs
BLUE BELL, Pa. November 2015 - MEN is introducing the first member of a new family of safe I/O boards around the MTCS Modular Train Control System. The K1 supports eight digital outputs and takes over up to SIL 4 relevant functions within the MTCS.
Safety up to SIL 4 for Digital Outputs
Within the new product family around the MTCS Modular Train Control System, which was developed to control safety-critical functions in a train, MEN is presenting the first I/O board, K1, with binary output functionality.
The voltage range of 24 V up to 110 V of the K1 complies with all requirements for rolling stock. With its integrated supervisor functions, extended temperature range and overall EN 50155-conformity, the K1 is perfectly prepared for its usage in the MTCS.
The MTCS family consists of the MH50C controller unit together with the safe, SIL 4-certified CPU board F75P and up to 6 I/O cards. For more complex applications or if the places of operation are far away from each other the control unit can be extended by up to 63 remote I/O boxes.
The MH50C controller unit as well as the remote I/O boxes can be flexibly configured with the new I/O boards regarding their number and functionality. Beside the K1 also I/O boards for digital inputs and frequency inputs will be available. All components can be plugged and removed independently from each other in a system, making it possible to exchange cards or do a new configuration very easily.
MTCS, the Modular Train Control System from MEN, builds on standardized electronics and a standardized interface to the software application, and is therefore the very first open computer platform for automatic train operation and protection. Both operators and supplier benefit from noticeably lower system costs – not only for certification but also due to independence of suppliers regarding maintenance and life cycle management.
- 8 digital outputs, 24 V, 48 V, 72 V, 96 V, 110 V
- 300 mA per channel
- High-side switch outputs
- Optical isolation from other cards
- Extensive supervision functions
- Compliant to EN 50129, EN 50128, IEC 61508 and EN 50155
- -40 to +85°C operating temperature
- Certifiable up to SIL 4
- Conformal coating
MEN press documents are archived on this web site for historical purposes. Information in the documents is accurate at the time of release. However, product specifications and other specific information may change over time. Some information about product pricing and availability may be limited to specific geographic areas and may differ in other areas. Information as stated in the document may or may not be in effect after the date of the release.In addition, press documents may contain statements that are forward-looking. These statements are based on current expectations as of the date of a particular release. Actual results may differ materially from those projected because of a number of risks and uncertainties.