Log in/Register News & Media | Downloads | Corporate | Careers | Contact Request
+49 911 99 33 5-0
info@men.de

RS1 - Managed 8-Port Rugged Ethernet Switch with PoE
 

IP67 Industrial Stand-Alone Device

This product has been discontinued.

The RS1 is a managed industrial, IP67 stand-alone Fast Ethernet switch that provides eight Ethernet channels and a Gigabit uplink port on M12 connectors

Download data sheet

  • RS1 Product ImageRS1 Railway Ethernet Switch
  • RS1 Product ImageRS1 configuration example without Ethernet uplink
  • RS1 Product ImageRS1 configuration example back side
  • RS1 Product ImageRS1 mounting plate sample
  • RS1 Product ImageRS1 mounting plate sample
  • RS1 Product Image
  • RS1 Product Image
  • RS1 Product Image
  • RS1 Product Image
  • RS1 Product Image

Main Features

  • Managed 8-port rugged Ethernet switch
  • Rugged aluminum enclosure (220 x 130 x 70 mm)
  • Fanless and maintenance-free
  • 8 Fast Ethernet ports via M12 connectors
  • 1 Gigabit uplink port via M12 connector
  • Power over Ethernet (PoE) PSE (ports 1 and 2)
  • Configuration via CLI (RS232, Telnet or SSH), SNMP ver. 3 or ext. dongle
  • 2x 24 VDC or 110 VDC nom. redundant power supply, service interface via M12 connectors
  • Status LEDs for ports, power and more
  • -40 to +70(+85)°C operating temperature
  • EN 50155 class Tx (railways) and IP67 compliant
  • ISO 7637-2 compliant (E-mark for automotive)
RS1 Product Image

Technical Data

Key Features
  • Simple Switch replacement: configuration can be done via external dongle without any tools
  • High-speed non-blocking, store-and-forward switching
  • Eight 10/100-T ports at front panel (Electrical isolation: 1500 Vrms)
  • One Gigabit uplink port at front panel
  • Port configuration: copper, 10/100 Mbit/s
  • Auto-negotiation / Auto MDI/MDIX crossover on all ports / manual configuration possible
  • Layer2-based Policy Control List
  • 8K MAC address lookup table with automatic learning and aging
  • Up to 4096 VLANs
  • Rapid Spanning Tree Protocol and Multiple Spanning Tree Protocol to ensure loop free topology formation
  • Reducing multicast traffic in the network through multicast snooping - IGS (IPv4) and MLDS (IPv6)
Management Firmware System Features
  • Saving and restoring user configurations
  • Software upgrades through TFTP
  • System logs (syslog) and e-mail alerts for critical events
  • Remote monitoring (RMON) and alarm generation
  • Displaying the running configuration in the form of CLI commands
  • Management interfaces through
    • CLI (RS232 console, Telnet, SSH)
    • SNMP v3
  • Switch configuration can be loaded from external dongle
Management Firmware Security Features
  • User authentication using 802.1x
  • Controlling management access through SNMP and CLI only from authorized managers
  • MAC based access list (ACL) for traffic filtering
  • Rate-limiting and storm control to prevent packet flooding from malicious peers
Supported Protocols and Standards
  • DHCP client / server / relay (IEEE 1394)
  • Ethernet flow control (IEEE 802.3x)
  • GARP (VLAN-aware bridging)
  • GVRP/GMRP support (IEEE 802.1D, 2004)
  • Hypertext Transport Protocol (HTTP) Server for Remote Management and Monitoring (RFC2626)
  • HTTP Secure (HTTPS) - HTTP-based Remote Management over encrypted data channel (RFC2818)
  • IGMP snooping / IGMP proxy / IGMP Querier / MLD Discovery (RFC 4541)
  • Link aggregation LACP / EtherChannel (IEEE 802.3ad, 2005)
  • Link Layer Discovery Protocol LLDP (IEEE 802.1ab, 2005)
  • Multiple Spanning Tree (MSTP) (IEEE 802.1s)
  • Path MTU Discovery Protocol (PMTUD) (RFC 1984)
  • Priority-based switching, Quality of Service/DiffServ, tagged frames, Layer2-based 801.1Q VLAN-ID packet routing (IEEE 802.1p)
  • Port-based authentication with EAP (IEEE 802.1x - REV2004/RFC3748)
  • Power over Ethernet support (IEEE 802.3af / IEEE 802.3at, Type 1)
  • Rapid Spanning Tree Protocol (RSTP IEEE 802.1w)
  • Remote Network Monitoring Information Base v1 (RFC2819)
  • Secure Shell (SSH) for Remote Configuration (CLI) over secure channel
  • Secure Sockets Layer - Encrypted Data Exchange (RFC5246)
  • SNMP v1, v2c, v3 management
  • Syslog (RFC 5424)
  • TCP/IP v4 and v6
  • TFTP (RFC 1350)
  • VLAN/port-based VLANs GVRP/MVRP (IEEE 802.1Q Rev D5.0, 2005)
Power Over Ethernet Features
Power over Ethernet functions on ports 1 and 2
  • PSE (Power Sourcing Equipment) function
  • Supplies one PD class 0 device or two PD class 2 devices (up to 15 W total)
Service Interface
  • M12 connector at front
  • RS 232 / V24
  • I²C interface for external dongle
Front I/O
  • Eight Ethernet ports via M12 connectors
  • Gigabit uplink port
    • 8-pin M12 connector, A-coded
  • One service interface via M12 connector
  • Two redundant power inputs via M12 connectors
  • Link and activity Ethernet status LEDs (2 per channel)
  • Power over Ethernet status LEDs
  • Status LEDs for power, reset and error codes
Electrical Specifications
  • Power input
    • Nominal input voltage 24 VDC (9 to 36 V) or 110 VDC (77 to 150 V) according to EN50155
    • Two redundant inputs
    • Power-on threshold: 0.7xUn = 16.8 V (for 24 VDC PSU) or 77 V (for 110 VDC PSU)
    • Power change-over threshold (when a secondary power source is connected): 12 V (for 24 VDC PSU) or 66 V (for 110 VDC PSU) (lower input voltage results in automatic switch to secondary power source)
    • Minimum input voltage when no secondary power source is connected: 9 V (for 24 VDC PSU) or 66 V (for 110 VDC PSU)
  • EN50155 power interruption class S2
  • Isolation (according to EN50155)
    • 1500 Vrms
  • Power consumption at Unom (24 V): 24 W (incl. 15 W PoE)
Mechanical Specifications
  • Dimensions: 220 mm x 130 mm x 70 mm (without connectors)
  • Prepared for wall or DIN-rail mounting with special mounting plates (available separately)
  • Weight: 1.9 kg
Environmental Specifications
  • Temperature range (operation):
    • -40..+70°C (+85°C) with up to 85°C for 10 minutes according to class Tx (EN50155)
    • Airflow: natural convection
  • Temperature range (storage): -40..+85°C
  • Relative humidity (operation): max. 95% non-condensing
  • Relative humidity (storage): max. 95% non-condensing
  • Altitude: -300 m to + 3000 m
  • Shock: 50 m/s², 30 ms (EN 61373)
  • Vibration (function): 1 m/s², 5 Hz - 150 Hz (EN 61373)
  • Vibration (lifetime): 7.9 m/s², 5 Hz - 150 Hz (EN 61373)
  • Conformal coating on request
  • Climatic tests according to EN68068
  • IP67 compliant
  • Fully EN 50155-compliant (Power Interruption Class 2, Temperature Class Tx)
MTBF
250 185 h @ 40°C according to IEC/TR 62380 (RDF 2000)
Safety
Flammability (PCBs)
  • PCBs manufactured with a flammability rating of 94V-0 by UL recognized manufacturers
EMC
  • Tested according to the following railway standards:
    • EN50121 (radio disturbance)
    • EN61000-4-2 (ESD)
    • EN61000-4-4 (burst)
    • EN61000-4-5 (surge)
  • Conforming to E1 requirements of the German Federal Motor Transport Authority
  • Tested according to the following automotive standards:
    • CISPR25/CISPR16 (radiated emission)
    • ISO7637-2 (conducted emission - power line)
    • ISO7637-2 (conductive immunity - power line)
    • ISO7637-3 (capacitive immunity - signal line)
    • ISO11452-2, ISO11452-5 (radiation immunity)
    • EN50121 (radio disturbance)
Software Support
Firmware for configuration and management included

Options

Ethernet Switch Functions / Mechanical Specifications
No Gigabit Uplink port
Electrical Specifications
Other nominal input voltages: 36, 48, 72 or 96 VDC
  • Wide input range (according to EN50155): 0.7 x nominal voltage < nominal voltage < 1.25 x nominal voltage

Ordering Information

Software

Firmware/BIOS
14ETSW-00

Ethernet Switch Firmware for managed RSx, SFx, F302 and G302 models

Contact Request! Use this form to get the fastest possible reply.
Please make sure to fill out the complete form, so we can provide quick and specific support.
Your request will be sent to our sales team.

Your information will not be shared!

* required fields

Your Request

Your Contact Data

Please type in the letters and/or numbers that you see in the image on the left (case-sensitive).