Log in/Register News & Media | Downloads | Corporate | Careers | Contact Request
+49 911 99 33 5-0

XC4 - ESMini COM Carrier Board

Evaluation Platform

This product has been discontinued.

The XC4 is an evaluation and development platform that can be used together with any type of ESMini module.

Download data sheet

  • XC4 Product ImageXC4 ESMini COM Evaluation Carrier Board
  • XC4 Product ImageESMini module MM2 mounted on the XC4
  • XC4 Product Image
  • XC4 Product Image

Main Features

  • microATX form factor
  • 1 ESMini computer-on-module slot
  • 2 PCI Express x1 connectors
  • 2 GB USB Flash
  • 1 SATA
  • HD audio in and out
  • 5 USB 2.0 Master, 1 USB 2.0 Client
  • 2 Fast Ethernet
  • 2x CAN bus, 2x RS232 via SA-Adapters
  • 120 FPGA signalsfrom ESMini
XC4 Product Image

Technical Data

ESMini Carrier Card
  • One ESMini slot
  • P1 and P2 assembled
  • One SATA connector
  • Two 2GB USB Flash disks included in the delivery
    • Via two USB onboard connectors
  • One SDIO/MMC slot
  • One DVI rear connector
  • One LVDS ZIF connector
    • For direct connection of an LVDS display
  • One LVDS backlight 10-pin connector
  • Six USB 2.0 host connectors, one USB 2.0 client connector
    • Only five host connectors can be used when the client connector is used
  • 10/100Base-T Ethernet
    • Two interfaces on RJ45 connectors
  • HD Audio
    • Audio in
    • Audio out
    • S/PDIF out
  • RS232
    • Two onboard connectors
    • Physical interface via SA-Adapters
    • Only one if a second PCI Express card is plugged
  • CAN Bus
    • Two onboard connectors
    • Physical interface via SA-Adapters
    • Only one if a second PCI Express card is plugged
  • GPIO
    • 120 FPGA signals from ESMini on two 60-pin connectors
    • Four user-defined GPIO/LED signals on four 3-pin headers
PCI Express
Two PCIe x1 connectors
  • Battery holder
  • Power button
  • Reset button
Electrical Specifications
  • Supply voltage/power consumption:
    • ATX standard power supply via 24-pin connector and 4-pin connector
  • MTBF: tbd @ 40°C according to IEC/TR 62380 (RDF 2000)
Mechanical Specifications
  • Dimensions: 244 mm x 244 mm (conforming to microATX standard)
  • Weight: 474 g (without ESMini module)
Environmental Specifications
  • Temperature range (operation):
    • 0..+60°C
    • Airflow depending on ESMini module
  • Temperature range (storage): -40..+85°C
  • Relative humidity (operation): max. 95% non-condensing
  • Relative humidity (storage): max. 95% non-condensing
  • Altitude: -300 m to +2,000 m
  • Bump: 10 g/16 ms
PCB manufactured with a flammability rating of 94V-0 by UL recognized manufacturers

Ordering Information

Standard XC4 Models

Evaluation and development board for all ESMini modules, 0..+60°C, incl. 2 GB USB Flash Disk and SA-Adapters for 1 RS232 and 1 CAN bus

This product can be ordered until 2015-03-31
Related Hardware
MM50 - ESMini COM with PowerPC MPC512x

MPC5123, 400 MHz, 256 MB DRAM, 32 MB Flash, 128 KB FRAM, 1 Fast Ethernet, 4 CAN bus, 2 COM, 6 USB, 1 SDHC, display interface, AC'97, 6 PSC, -40..+85°C screened

SA1 - RS232 Interface Adapter

RS232, not optically isolated, 0°C to +60°C

SA2 - RS422/RS485 Interface Adapter

RS422/485, half duplex, optically isolated, 0°C to +60°C

SA2 - RS422/RS485 Interface Adapter

RS422/485, full duplex, optically isolated, 0°C to +60°C

SA3 - RS232 Interface Adapter

RS232, optically isolated, 0°C to +60°C

SA8 - CAN Bus ISO High-Speed Interface Adapter

CAN bus ISO high-speed, optically isolated, 0..+60°C



Data Sheets
User Manuals
Errata & Technical Information
Contact Request! Use this form to get the fastest possible reply.
Please make sure to fill out the complete form, so we can provide quick and specific support.
Your request will be sent to our sales team.

Your information will not be shared!

* required fields

Your Request

Your Contact Data

Please type in the letters and/or numbers that you see in the image on the left (case-sensitive).