F223 - Wireless Network Board for 2 PCIe and 2+16 SIM Cards
3U CompactPCI
F223 is a rugged 3U CompactPCI carrier for wireless functions like WLAN, WAP, UMTS, GPS, GSM, HSDPA, LTE supporting PCIe Mini Cards and up to 18 SIM cards
Main Features
Technical Data
- For two PCI Express Mini Cards
- With two SIM card holders (one for each PCI Express Mini Card)
- PCI Express and USB interface
- Individual reset and power on/off for each PCI Express Mini Card
- Via GPIO lines of the PCI Express/USB controller
- Up to 16 additional SIM cards on a special adapter board
- USB-SIM socket for SIM emulator
- Please note that MEN does not offer SIM cards or mobile telephony contracts!
- Compliance with CompactPCI Core Specification PICMG 2.0 R3.0
- Peripheral slot
- 32-bit/33-MHz PCI-to-PCI Express bridge
- V(I/O): +3.3V (+5V tolerant)
- J2 connector with geographical addressing for distinguishing boards in a system with several boards
- +5V (-3%/+5%), depending on plugged card, 1.1 A without PCI Express Mini Cards
- +3.3V and 1.5V supply voltage for cards generated onboard
- Dimensions: conforming to CompactPCI specification for 3U boards
- Front panel: 4HP front panel with four SMA connectors available as an accessory
- Weight:
- 198 g (with front panel and PCI Express Mini cards)
- 104 g (without front panel and PCI Express Mini cards)
- Temperature range (operation):
- -40..+85°C (only carrier, depending on configuration)
- Airflow: min. 1.0 m/s
- Temperature range (storage): -40..+85°C
- Relative humidity (operation): max. 95% non-condensing
- Relative humidity (storage): max. 95% non-condensing
- Altitude: -300 m to + 3,000 m
- Shock: 50 m/s², 30 ms (EN 61373)
- Vibration (function): 1 m/s², 5 Hz - 150 Hz (EN 61373)
- Vibration (lifetime): 7.9 m/s², 5 Hz - 150 Hz (EN 61373)
- Flammability (PCBs)
- PCB manufactured with a flammability rating of 94V-0 by UL recognized manufacturers
- Electrical Safety
- Insulation measurement test according to EN 50155 (12.2.9.1) (railway)
- Voltage withstand test according to EN 50155 (12.2.9.2) (railway)
- Information technology equipment test according to EN 60950 (information technology equipment)
- Voltage withstand test according to EN 50124-1 (Annex B) (signal- and telecommunication equipment)
- EN 55022 (radio and conducted disturbance)
- IEC 61000-4-2 (ESD)
- IEC 61000-4-3 (electromagnetic field immunity)
- IEC 61000-4-4 (burst)
- IEC 61000-4-5 (surge)
- IEC 61000-4-6 (conducted disturbances)
Options
- Up to 22 SIM card holders (eleven for each PCI Express Mini Card)
- I2S interface for audio signals (via digital audio I/O streamer)
- I2S interface only with special non-standard PCI Express Mini Card
- USB-SIM emulator
- For two PCI Express Full-Mini or Half-Mini Cards (dual-use sockets)
- Two or three antennas per PCI Express Mini Card
- QMA instead of SMA antenna connectors
Ordering Information
2 PCI Express MiniCard slots (USB and PCI Express support), 2 SIM card holders, SIM expansion socket, -40..+85°C screened (carrier only), conformal coating (front panel to be ordered separately)
Front panel 4HP, with 4x QMA reverse connectors, -40 °C to +85 °C
SIM card expansion board with 2x 8 SIM card slots, -40 °C to + 85°C, conformal coating
USB HID to analog audio PCI Express Mini Card, 1 stereo input and 1 stereo output, conformal coated
DetailsPX6, Security Smart Card Reader, 2FF Card holder, PCI Express Mini Card connector pass through, -40..+85°C
DetailsPCI Express Mini Card for converting PCI Express Mini to M.2 and PCI Express x1 to USB3.0, USB 3.0 extension for Box PCs, -40 to +85, conformal coated
DetailsSoftware

MDIS5 System (and Device Driver) Package (MEN) for Linux. This software package includes most standard device drivers available from MEN.

MDIS5 Windows driver (MEN) for F223