Log in/Register News & Media | Downloads | Corporate | Careers | Contact Request
+49 911 99 33 5-0
info@men.de

PU1 - Power Supply Unit, 110 VDC, 75 W

3U 12 HP PSU

The 3U 12HP power supply unit PU1 is a plug-in device for 19" systems (e.g. VMEbus, CompactPCI) and is especially designed for railway computer systems, being fully compliant with EN 50155.

Download data sheet

  • PU1 Product ImagePU1 3U 12 HP Power Supply Unit PSU, 110 VDC, 75 W
  • PU1 Product Image

Main Features

  • 19" rack mountable (VMEbus, CompactPCI)
  • 3U, 12 HP
  • Input 110 VDC nom. (77..137.5 V)
  • Max. input voltage range 66..154 V (according to EN 50155)
  • Output 5.1 V
  • Power 75 W
  • H15 DIN 41612 plug connector (front and rear)
  • -40 to +85°C without derating, withqualified components
  • Conformal coating
  • Complies with EN 50155 (railways)
PU1 Product Image

Technical Data

General
  • Standard Euro rack size 19"
  • Integrated heat sink for extremely low thermal stress to temperature sensitive components
  • Glued parts for better vibration resistance
  • Overtemperature and overvoltage shutdown
  • Short circuit protection
  • Remote on/off
  • LEDs: green LED indicates correct input voltage, yellow LED indicates operating mode
  • Fixed switching frequency 200kHz
  • Reverse polarity protection by internal protector
  • Thermal Warning (TW)
    • Operating criteria: Overtemperature shutdown -5K (Risk of overtemperature exists.)
    • Output TW: Output with NPN transistor, emitter connected with V out-; max. current 30mA
  • Hold-up Time
    • According to EN 50155 Class S2 for P out 75W
  • Supply Fail (FAL)
    • Output FAL: Isolated optocoupler output with NPN transistor
    • Current: 5mA
    • Voltage max.: 5V
    • Pins: Open collector FAL, emitter FAL connected to V out-
    • Isolation: FAL-V in: 1.500 Vrms
  • Sense (S)
    • Provides compensation of voltage drops (max. 0.2V each line) between power supply and load
    • Pins S+ and S- of converter must be connected to load
  • Shutdown interrupt (SD-INT)
    • SD-INT in: 24V
    • SD-INT out current: 5mA
    • SD-INT out voltage: 5V
    • SD-INT out pins: Collector pull-up resistor 10K to V out+
    • SD-INT out isolation: SD-INT in to SD-INT out: 1.500 Vrms
Input Characteristics
  • Nominal voltage input: 110V DC
  • Wide input range: 0.7 x nominal voltage < nominal voltage < 1.25 x nominal voltage (according to EN50155)
    • 77..137.5 VDC
  • Max. input voltage range: 0.6 x nominal voltage < nominal voltage < 1.4 x nominal voltage with full functionality for 0.1 s, no damage for 1 s (according to EN50155)
    • 66..154 VDC
  • Voltage on threshold: 1.1V
  • No load input current: 15mA
Output Characteristics
  • Output: 5V/75W
  • Accuracy: ±0.5%
  • Voltage deviation: 12%
  • Rise time: 80ms
  • Overvoltage protection: 1.2V
  • Overcurrent protection: 1.08A min., 1.15A max.
  • Overtemperature shutdown: 101°C min., 105°C typ., 107°C max.
Connection
Input and output via DIN 41612 plug connector, type H15
Electrical Specifications
  • Isolation
    • Input/output: 1500V eff
    • Input/case: 1500V eff
    • Output/case: 500V eff
  • MTBF: tbd. @ 50°C (derived from MIL-HDBK-217F)
Mechanical Specifications
  • Dimensions: 3U, 12HP, 128.4mm height
  • Weight: ca. 1395g
Environmental Specifications
  • Temperature range (operation): -40..+85°C
  • Temperature range (storage): -40..+105°C
  • Shock: according to IEC 68-2-27
  • Continuous shock: according to IEC 68-2-29
  • Vibration: according to IEC 68-2-6
  • Protection
    • Class of protection: Class I, EN 60950
    • Degree of protection: IP20 (inserted in rack), DIN 40050 (IEC 529)
  • Pollution degree: 2 (EN 60950)
Safety
Tbd.
EMC
Tbd.

Ordering Information

Standard PU1 Models
0712-0033

PSU 3U, 12TE, input 110 VDC nominal (66-154V), output 5V/80W, -40 to +85°C qualified, noise immunity class A, conformal coating

Documentation

Contact Request! Use this form to get the fastest possible reply.
Please make sure to fill out the complete form, so we can provide quick and specific support.
Your request will be sent to our sales team.

Your information will not be shared!

* required fields

Your Request

Your Contact Data

Please type in the letters and/or numbers that you see in the image on the left (case-sensitive).