Log in News & Media | Downloads | Corporate | Careers | Legal Notes
+49 911 99 33 5-0
info@men.de

SA18 - USB 1.1 Interface Adapter

SA-Adapter

The SA18 provides the transceiver part of a USB 1.1 interface, using a standard type A connector and connected by a ribbon cable.

Download data sheet

  • SA18 Product ImageSA18 USB 1.1 SA-Adapter
  • SA18 Product Image

Main Features

  • 1 USB 1.1 channel
  • Standard USB connector (Type A)
SA18 Product Image

Technical Data

Interface
  • USB 1.1
  • Data rates up to 12Mbit/s
  • OHCI implementation
  • Up to 127 devices controlled by one controller
  • Support of all transfer modes (control, interrupt, bulk, isochronous)
  • Self powered hub functionality
Peripheral Connection
  • Series A connector at front panel
  • Power line pin overcurrent limited and fused against short cicuit
  • Thermal shutdown
  • Nominal load 5 USB units (5V/0.5A)
  • Data signal lines protected from transient voltages
Installation
Via ribbon cable
Electrical Specifications
  • Supply voltage/power consumption:
    • +5V (-3%/+5%), 600mA typ./max.
  • MTBF: tbd. (derived from MIL-HDBK-217F)
Mechanical Specifications
  • Dimensions: 32mm x 42mm
  • Weight: 20g
Environmental Specifications
  • Temperature range (operation):
    • -40..+85°C
    • Airflow: min. 10m³/h
  • Temperature range (storage): -40..+85°C
  • Relative humidity (operation): max. 95% non-condensing
  • Relative humidity (storage): max. 95% non-condensing
  • Altitude: -300m to + 3,000m
  • Shock: 15g/11ms
  • Bump: 10g/16ms
  • Vibration (sinusoidal): 2g/10..150Hz
  • Conformal coating on request
Safety
PCB manufactured with a flammability rating of 94V-0 by UL recognized manufacturers
EMC
Tested according to EN55022 / 1999-05 (radio disturbance) and EN 55024 /1999-05 (immunity)

Ordering Information

Documentation