Follow Us
F603 - Side Card USB/COM
3U CompactPCI
The F603 is a 4HP mixed USB/COM extension card for 3U Intel based CompactPCI single-board computers. It can be used in combination with the F14 and compatible CPU boards.
F603 side card configuration example (USB/COM)
F603 side card configuration example (USB/COM) mounted on a F14 equipped with a CompactFlash
F603 side card configuration example (USB/COM) mounted on a F14 equipped with a CompactFlash and an adapter with a second CompactFlash
F603 side card configuration example (USB/COM) mounted on a F14 equipped with a hard disk
F603 side card configuration example (USB/COM) mounted on a F14 equipped with a hard disk and a CompactFlash
Main Features
- 4 HP extension for 3U Intel SBCs F14, F15, F17, F18, F19P, F21P
- 1 RS232
- 2 USB 2.0
- 2.5" SATA hard-disk slot
- CompactFlash slot
Technical Data
I/O
- USB
- Two USB 2.0 ports
- Type A connector at front panel
- UHCI implementation
- Data rates up to 480Mbit/s
- High current up to 1A
- UART
- One RS232 at front panel
- Data rates 300bit/s..230kbit/s (up to 1 Mbit/s with shielded cable)
- FIFO receive and transmit buffers for high data throughput
- Handshake lines: full support
Mass Storage
- Serial ATA (SATA)
- One port for onboard 2.5" hard-disk drive
- Transfer rates up to 150MB/s (depends on hard disk)
- RAID level 0/1 support (depends on CPU board)
- CompactFlash card interface
- Via USB to PATA converter
- Type I
- True IDE mode
- Multiword DMA 2 and UDMA 4 support
- Please note that operating systems which cannot boot from removable data carriers (e.g. Windows XP) cannot boot from the CompactFlash over USB
Miscellaneous
CompactPCI J1 is assembled for increased mechanical stability and/or for power supply
Electrical Specifications
- Supply voltage/power consumption:
- +5V (-3%/+5%), 50mA typ. (w/o hard disk)
- +3.3V (-3%/+5%), 95mA typ. (w/o hard disk)
- MTBF: tbdh @ 40°C according to IEC/TR 62380 (RDF 2000)
Mechanical Specifications
- Dimensions: conforming to CompactPCI specification for 3U boards
- Mountable on right (standard) or left (option) side of the CPU
- Weight: 130g (w/o hard disk and CompactFlash)
Environmental Specifications
- Temperature range (operation):
- 0..+60°C up to -40..+85°C (depending on hard disk; please refer to the hard disk specifications for possible limits)
- Airflow: min. 10m³/h
- Temperature range (storage): -40..+85°C
- Relative humidity (operation): max. 95% non-condensing
- Relative humidity (storage): max. 95% non-condensing
- Altitude: -300m to + 3,000m
- Shock: 15g/11ms
- Bump: 10g/16ms
- Vibration (sinusoidal): 2g/10..150Hz
Safety
PCB manufactured with a flammability rating of 94V-0 by UL recognized manufacturers
EMC
Tested according to EN 55022 (radio disturbance), IEC 61000-4-2 (ESD) and IEC 61000-4-4 (burst)
Software Support
Driver software can be found in the data sheet of the CPU board that you use.
Options
Mass storage
Second CompactFlash interface instead of SATA hard disk
- Via AD95 adapter
Mechanical
Mounting of side card on left side of the CPU
Operation Temperature
- 0..+60°C
- -40..+85°C
Some of these options may only be available for large volumes.
Please ask our sales staff for more information.
Ordering Information
Standard F603 Models
02F603-00
3U CompactPCI side card with 2 USB and 1 COM extension, SATA hard disk and CompactFlash slot, for F14 and compatible SBCs, mounted to the right of the SBC, 0..+60°C
Miscellaneous Accessories
0710-0038
HDD SATA 2.5", 100 GB, 1.5GB/s, 4200rpm, -10° to +70°C
Mass Storage
0751-0028
CompactFlash card, 2 GB, Type I, -40 to +85°C, S.M.A.R.T. interface
0751-0060
CompactFlash card, 16 GB, -40 to +85°C
0754-0011
SSD SATA, 2.5", 256 GB, MLC, -40 °C to +85 °C
Documentation
Data Sheets
User Manuals